Chihiro Outrun 2 (not SP)

You'll get FFB with both Type 1 and Type 3 Chihiro when it's installed in a F355 cabinet, OR2 works with the Model 3/F355 drive board combo AND later Initial D/OR2 FFB Midi board. It's OR2SP that doesn't support the older Model 3/F355 drive board combo.

The only difference between Type 3 Network and Type 3 Non Network is a small network PCB and small metal cover/plate, the baseboard is the same. OR2 SP requires the network board to be attached, otherwise it fails at the network check and doesn't go into game. There could be other outliers, but I've not encountered any issues with other games.

I'm not sure what version of Chihiro is in official OR2 cabinets, Type 1 or Type 3. All I know is that there's a router in the base of Japanese OR2 cabinets that links multiple cabs together, I'm not sure what socket the ethernet cable comes from though, so you may need Type 1 Netdimm or Type 3 with network PCB to link cabs.

Chunksin/Rich was selling some Type 1 tops for £20 a while back. Maybe he still has one?

I do have a faulty Type 1 top I could throw in with the Motherboard, but I couldn't get it to work when I tested it. Could be just a fuse though?

The above Type 3 is what I use in my own F355 cabinet. To be honest I may remove the Type 3 from sale after I've slept on it as I do have a future project I can use it on.

I place £50 value on the OR2 Disc and Chip as that's what it cost me. So if you wanted the working motherboard without game you can have the motherboard for £175.