Print Page | Close Window

Jamma Adapters pcb

Printed From: ukVac.com
Category: Trading Post
Forum Name: For Sale
Forum Description: Sell your stuff
URL: http://www.ukvac.com/forum/forum_posts.asp?TID=364465
Printed Date: 06 Dec 2019 at 4:56pm


Topic: Jamma Adapters pcb
Posted By: kold666
Subject: Jamma Adapters pcb
Date Posted: 30 Jun 2018 at 8:19am
I am selling these adapters to use classic games on Jamma harness

Be aware that they are tested on original pcbs. If you have a bootleg pcb please ask first!

Capcom Jamma Adapter (for Ghosts and Goblins ,Commando, Gunsmoke,Section Z, Legendary Wings, Avengers, Trojan, Exed Exes ) :

https://ibb.co/FzQk33d" rel="nofollow">

Price 20€
6 pieces on stock


IREM Jamma Adapter with possibility to swap push buttons ( Moon Patrol, Kung Fu Master / Spartan X, Spelunker 1 and , Lode Runner, 10 Yard Fight, Kid Niki Radical Ninja, Traverse USA,Tropical Angel, Wily Tower / Atomic Boy)

https://ibb.co/iHpf2z" rel="nofollow">

Price 20€
3 pieces on stock


Namco Jamma Adapter (Xevious,Mappy,Bosconian,Super Pacman,Phozon,Motos,Galaga,Gaplus
Pacland,Dig Dug 1 e 2,Sky Kid,Metro Cross,Toypop,Baraduke,Dragon Buster)

Featuring alternative pacland controls (buttons for directions) and Libble Rabble controls ( double way joystick)

https://ibb.co/TWLHGkP" rel="nofollow">

Price 25€
5 pieces on stock

Sega System 1 Jamma Adapter with possibility to swap push buttons.
List of games:
http://www.system16.com/hardware.php?id=693
http://www.system16.com/hardware.php?id=694

https://imgbbb.com/image/L56rJn" rel="nofollow">

Price 20€
4 pieces on stock

Sega System 16/24 Jamma Adapter with configurable push buttons.
List of games:

http://www.system16.com/hardware.php?id=695

http://www.system16.com/hardware.php?id=700

http://www.system16.com/hardware.php?id=701

http://www.system16.com/hardware.php?id=708

https://ibb.co/cwndpe" rel="nofollow">

Basic Price 25€
3 pieces on stock

With 5€ overprice I can solder the connector and cables for wiring Passing Shot 1P controls which are on a separate board on the pcb
It supports both single joystick play and the original control panel like controls with double joystick
Will send also the instructions where to connect the cables on the original pcb separate board.

https://ibb.co/cUgk2z" rel="nofollow">


Tehkan Jamma Adapter
Bombjack ,Senyjo,Guzzler,Rygar,Star Force,Tank Busters,Meg Force

including Jumper to configurate Bomback or other games inputs

https://imgbbb.com/image/LVXqBZ" rel="nofollow">

Price 25€
1 pieces on stock

1942 / Vulgus Jamma Adapter

https://ibb.co/dj9f2z" rel="nofollow">

Price: 20€
2 pieces on stock


Exerion Jamma Adapter
compatible also with Formation Z / Aerobot and City Connection


https://ibb.co/eLmPvK" rel="nofollow">

Price: 20€
5 pieces on stock

Falcon Type A Jamma Adapter
compatible with:
Falcon Crazy Kong ( it has two connectors , type A is for the side one)
Phoenix
Eyes from Rockola/Zaccaria
Some Sigma games such as Battle Cruiser M-12

IMPORTANT: It is not compatible with Crazy Kong by ORCA.


https://ibb.co/hNEYpe" rel="nofollow">

Price 20€
3 pieces on stock

Falcon Type B Jamma Adapter
compatible with:

Crush Roller
Van Van Car
Kyugo/Crux games such as:
Gyrodine/Buzzard
Sky Lancer
Flashgal
99 Last War / Repulse
Legend

https://imgbbb.com/image/LyJlwa" rel="nofollow">

Price: 20€
4 Items on stock


Higemaru Jamma Adapter


https://ibb.co/g4dwaK" rel="nofollow">

Price 20€
2 pieces on stock

Son Son Jamma Adapter

https://ibb.co/eKWhFK" rel="nofollow">

Price: 20€
3 pieces on stock

Konami Jamma Adapter
compatible with all pre jamma Konami games with support up to 3 buttons (Iron Horse).
Possibility to swap 1st/2nd button and to choose alternate button controls for Hyper Olympic/Hyper Sports as found in the original cabinet.

Supports additional right speaker for Gyruss pcb stereo music

https://ibb.co/nmhMztx" rel="nofollow">

Price: 25€
2 pieces on stock

Konami Jamma Adapter GYRUSS edition
Same features as the standard Konami adapter but additionally with:
RCA stereo speakers for Gyruss
Silkscreened Gyruss logo on the back

https://ibb.co/z5Zk5y2" rel="nofollow">
https://ibb.co/4WhT2NB" rel="nofollow">

Price: 30€
1 pieces on stock


Nichibutsu Jamma Adapter
compatible with Mag Max,Terra Cresta, Dangar Ufo Robot, Cosmo Police Galivan, Mighy Guy


https://ibb.co/ekKr9e" rel="nofollow">

Price: 20€
3 pieces on stock



SNK Jamma Adapter
Compatible with SNK classic games such as:


Ikari Warriors
Alpha Mission/Arian Mission
TNK3/TANK

https://ibb.co/QjGtY3k" rel="nofollow">

Price: 20€
4 pieces on stock

TECFRI Jamma Adapter
compatible with TECFRI spanish games such as:
Hole Land
Crazy Rally
Sauro
Tricky Doc


https://ibb.co/mUYevK" rel="nofollow">

Price: 20€
2 Items on stock

Toaplan Jamma Adapter
compatible with Slap Fight,Tiger Heli, Get Star / Guardian and Performan


https://ibb.co/z2jhnJq" rel="nofollow">

Price: 20€
3 pieces on stock

Zaxxon Jamma Adapter
compatible with Zaxxon, Super Zaxxon, Congo Bongo and Future Spy


https://ibb.co/nidzee" rel="nofollow">

Price 20€
4 pieces on stock

Universal Mr.Do! Jamma Adapter with built in amplifier

Compatible with Lady Bug, Mr.Do,Mr.Do Castle, Mr.Do Vs Unicorns, Do Run Run, Mr.Do Wild Ride, Cosmic Avenger


May work with other games or bootlegs but haven't tested.

The adapter comes with amplifier with adjustable Volume / Gain / Bass trimmers for games which don't have a sound amp on board

For Lady Bug which comes already with an amplifier on the pcb, you can switch off the adapter one.

It has also a footprint to solder an external connector in case you want to use an external amplfier of your choice.

https://ibb.co/ezT86V" rel="nofollow">

Price 35€
6 pieces on stock


DATA EAST Jamma Adapter with possibility to play Karate Champ and Karate Champ Vs
Compatible with:
Karate Champ and Karate Champ VS ( the jumpers selects Jamma 2P player joystick for attacks. Only 1 player is supported)
Battle Wings
Big Pro Wrestling!
B-Wings
Competition Golf
Ring King
Shootout
Battle Lane Vol. 5
Express Raider


https://ibb.co/bu7xFK" rel="nofollow">

Price 25€
3 piece on stock


Escape From The Planets of The Robots Monster Jamma Adapter with circuit to use digital joysticks instead of the original rare and expensive HALL Effect ones

https://ibb.co/fG1ZkU" rel="nofollow">

Price 40€
3 pieces on stock

TAITO classics Jamma Adapter
Compatible with:
Bubble Bobble, Tokio / Scramble Formation, Arkanoid,Elevator Action, Jungle King,Pit Run,Alpine Ski,Front Line,Tin Star,Wild Western,Kick Start
With a set of jumpers you can select single joystick games or double joystick games such as Tin Star, Front Line and Wild Western

https://imgbbb.com/image/L7yuma" rel="nofollow">

Basic price is 35€ and you will get male connector soldered for Arkanoid spinner and the 12 pins Power H harness needed for all the games ( see picture)

Optional Harness for Halley Comet pcb for 15€ extra

https://ibb.co/f0XdB7Z" rel="nofollow">

Optional Harness for Operation Wolf 15€ extra
Note: the 4 wires for the gun will be left unconnected because they need to be adapted to the harness of the optical gun in use.

6 pieces on stock

SNK classics early 80s adapter
Compatible with:
Fantasy,Satan Of Saturn,Sasuke vs. Commander, Nibbler, Vanguard, Pioneer Baloon
With set of Jumpers you can select alternate controls for Vanguard with second joystick to shoot in the 4 directions.

https://ibb.co/ksb7qf" rel="nofollow">

Price 25€
2 pieces on stock

Taito Samurai / The Alpha Z / Mission 660 / Lady Master of Kung Fu

https://ibb.co/Bs3Mvrp" rel="nofollow">

Price 20€
3 pieces on stock

Technos Jamma Adapter
Compatible with early Technos games such as Eggs, Scramble Eggs, Mysterious Stones, Acrobatic DogFight
Exciting Hour,Mat Mania , probably others

https://ibb.co/hfq7jmg" rel="nofollow">

Price 20€
4 pieces on stock

Frisky Tom / Seicross / Radical Radial Jamma Adapter

https://ibb.co/M1nx3vz" rel="nofollow">

Price 30€
0 pieces on stock

Spinner Jamma interface multipurpose
Compatible with Taito F3 spinner games ( Puchi Carat, Arkanoid Returns), Suna games ( Goindol, Brick Zone), Sega Nihon games ( Free kick)
Caliber 50 ( using Loop24 joystick), Badlands ( you can play it with a spinner yes!)
Spinner inputs are going to either pin 25/26 or 20/21 so many other games could work using the combination of pulldown resistors ( 2.2K or 10k)
It is tested with a TAITO spinner which doesn't have any pulldown resistors but it can work with any other spinners providing you disable
the pulldown resistors using the jumpers

It supports also Combat School joystick version ( directions are on a separate connector)  and Cabal third button ( on the original board
is is wired on the test button)

https://ibb.co/nCqQk85" rel="nofollow">

Price 35€
7 pieces on stock

Nintendo Jamma adapter
Compatible with Donkey Kong ( 2 board ), Donkey Kong Jr. , Mario Bros, Popeye and Donkey Kong 3

The adapter comes with quality colour inversion circuit which is a reproduction of the Hantarex one found on Nintendo cabinets imported in Europe.

The adapter has also an amplifier with adjustable volume, gain and bass.

Both the inversion circuit and the amplifier can be disabled via jumpers for later nintendo boards which have aldready the circuits installed on the boards.

https://ibb.co/gmydNxL" rel="nofollow">

Price 45€

1 pieces on stock


Taito Gladiator: Compatible with Gladiator and Ping Pong King


https://ibb.co/z84cq5P" rel="nofollow">

Price 20€
3 pieces on stock


DATA EAST Cassette: compatible with all DECO Cassette hardware and also with the following pcbs: Burning Rubber / Burger Time / Disco No.1 / Zoar / Liberation


https://ibb.co/jHK6Zy3" rel="nofollow">

Price all assembled including  10 pins edge connector for bottom board: 30€
3 pieces on stock

Alpha Denshi Classics: compatible with Equites, Splendor Blast, High Voltage, Kyros, Super Stingray, Bull Fighter

https://ibb.co/PGcmQGw" rel="nofollow">

Price all assembled including additional 6 pins edge connector for sound: 30€
2 pieces on stock


Kangaroo jamma adapter for rev.B PCB ( the one more common with the edge connectors)


https://ibb.co/XXVzYBD" rel="nofollow">

Price all assembled including  10 pins edge connector for bottom board: 30€
4 pieces on stock


Qbert bootleg jamma adapter with circuit to use a normal 8 way joystick ( originally you have to rotate a 4 way joystick by 45°, not very confortable on a jamma cabinet ;-)


https://ibb.co/h2mkhRz" rel="nofollow">

Price 25€
3 pieces on stock


Sega System E jamma adapter with support also for Riddle of Pythagoras spinner. The adapter is inserted durectly on the two AMP connectors of the System E


https://ibb.co/SsZj1RL" rel="nofollow">
https://ibb.co/Bffxnpk" rel="nofollow">

Price 25€
3 pieces on stock

Taito Great Swordsman Jamma adapter

https://ibb.co/QdYd1PP" rel="nofollow">

Price 25€
4 pieces on stock

Namco Pacman / Galaxian / Sega Mooncresta / Tank Battalion Jamma adapter

It could work also with bootlegs but no guarantee is given

https://ibb.co/yhGZFcG" rel="nofollow">

Price 25€
4 pieces stock

Atari Centipede Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers.
Supports both Trackball AND Joystick gameplay

https://ibb.co/VgfvGy3" rel="nofollow">

Price 35€
1 pieces on stock

Atari Crystal Castles Jamma Adapter

including sound amplifier on board with adjustable Volume / Gain / bass trimmers.

https://ibb.co/dBZ37RB" rel="nofollow">

Price 35€
3 pieces on stock

Playchoice 10 Double monitor Jamma adapter

comes with quality colour inversion circuit, sound amplifier with adjustable Volume / Gain / Bass trimmers and with the possibility to switch the 2 screens on the fly with button 3 ( instruction / credit screen and game screen )
Separate gun connector with clear pinout.

https://ibb.co/b6GkwPq" rel="nofollow">
https://ibb.co/RQwtLVT" rel="nofollow">
https://ibb.co/Fz4CQcQ" rel="nofollow">
https://ibb.co/88ddY9G" rel="nofollow">

Price 50€
0 pieces on stock provvisorily

Nintendo VS Jamma adapter

comes with quality colour inversion circuit, sound amplifier with adjustable Volume / Gain / Bass trimmers.
Possibility to switch switch between Main side and Slave side of the pcb providing you populate the board with two games.

https://ibb.co/ZSD1Dbs" rel="nofollow">
https://ibb.co/WVXHQ5v" rel="nofollow">

Price 55€
4 pieces on stock

Bank Panic Jamma adapter

compatible with Bank Panic and Super Cross II

https://ibb.co/pJzGJNM" rel="nofollow">

Price 20€
3 pieces on stock

MVS 2-4-6 Slots Jamma adapter

jumpers let you set stereo/mono settings and Test button for MVS.
In case you want to leave the adapter always in for normal jamma games you have to set jumpers to stereo mode
and Test jumper to Jamma.

If you have a Pandora multigame, you can enable the 6th buttons soldering the wires directly on the adapter.

https://ibb.co/FVk2685" rel="nofollow">

Price 25€
0 pieces on stock provvisorily

Le Bagnard / Bagman Jamma adapter

compatible both with the original Le Bagnard by Valadon Automation and Bagman licensed to Stern

https://ibb.co/c8VmS7s" rel="nofollow">

for Le Bagnard you have to modify the pcb as in the picture below to bypass  AC  diodes bridges

https://ibb.co/vQWkb0p" rel="nofollow">

Price 20€
1 pieces on stock

Jamma interface to play some selected MVS games / Jamma games with a spinner
Games tested to play great with a spinner are:
MVS Puzzle Bubble series, Trash Rally, Puzzle De Pon series
Thunder and Lighting , Pop'n'Pop,  Gunbarich

Additionally you can play ECO Fighter / Ultimate Ecology with Forgotten World Spinner!

https://ibb.co/Rhr3T8L" rel="nofollow">

Price 45€
3 pieces on stock

Taito Space Invaders Jamma adapter ( colour and B/W )
compatible also with Space Invaders Part 2 , Lunar Rescue , Ozma Wars and some other 3 board stack 8080 based hardware Taito games
Complete with harness for bottom board

https://ibb.co/ccVcWCB" rel="nofollow">
https://ibb.co/898d4hH" rel="nofollow">

Price 45€
5 pieces on Stock

Crazy Climber Jamma Adapter
1P joystick control left arm, 2P Joystick control right arm

https://imgbbb.com/image/LVO2cn" rel="nofollow">

Price 30€
3 pieces on stock

UPL Nova 2001 Jamma adapter

https://ibb.co/wNbYTN4" rel="nofollow">

Price 20€
4 pieces on stock

UPL Ninja-kun Ma-jo no Boken Jamma adapter

https://ibb.co/F8gB0cR" rel="nofollow">

Price 20€
4 pieces on stock

Kaneko Roller Aces Jamma adapter
PCB is only amplified stereo, sound outputs only from RCA connectors

https://ibb.co/93fwZDP" rel="nofollow">

Price 25€
4 pieces on stock

Zaccaria Money Money Jamma adapter
compatible also with Jack Rabbit

https://imgbbb.com/image/LmaYur" rel="nofollow">

Price 20€
4 pieces on stock

Sega Tapper Jamma adapter
Compatible only with the Sega version

https://imgbbb.com/image/Lma1zR" rel="nofollow">

Price 20€
4 pieces on stock

Pengo Jamma adapter

https://imgbbb.com/image/Lma7EJ" rel="nofollow">

Price 20€
4 pieces on stock

Nichibutsu Moon Shuttle Jamma Adapter

https://imgbbb.com/image/L56CTl" rel="nofollow">

Price 30€
4 pieces on stock


If something is unclear, please drop me a message!

Shipping rate up to three adapters is 13 euros with registered letter for all Europe.
Exceptions are the Nintendo VS or adapters which require extended harness: these costs something more, please ask.

I accept Paypal gift or goods but in the latter case please add 4% on top.


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/



Replies:
Posted By: kold666
Date Posted: 05 Jul 2018 at 10:50pm
update remaining stock


Posted By: kold666
Date Posted: 06 Jul 2018 at 3:54pm
updated stock items


Posted By: kold666
Date Posted: 13 Jul 2018 at 1:00pm
update stock items


Posted By: kold666
Date Posted: 16 Jul 2018 at 11:12pm
updated stock list


Posted By: kold666
Date Posted: 28 Jul 2018 at 7:43pm
updated with many new adapters


Posted By: kold666
Date Posted: 02 Aug 2018 at 6:11pm
updated stock list


Posted By: kold666
Date Posted: 06 Aug 2018 at 10:42am
updated remaining stock


Posted By: kold666
Date Posted: 04 Sep 2018 at 9:20am
update post with new versions of Irem / System 1 and System16 adapters.

New adapters Falcon type A and Data East


Posted By: kold666
Date Posted: 05 Sep 2018 at 10:04am
updated remaining stock


Posted By: smarty
Date Posted: 05 Sep 2018 at 10:11am
Your Photo links don't work.

-------------
http://www.jumpnfire.com" rel="nofollow - jumpnfire.com

MOST WANTED:
- Atari Return of the Jedi upright cabinet.
- Atari Pole Position PCB's.


Posted By: kold666
Date Posted: 05 Sep 2018 at 11:14am
they works for me, I can click and have an high resolution pic


Posted By: smarty
Date Posted: 05 Sep 2018 at 11:30am
Turns out the Wifi I was on wouldn't connect to the server where those photos are hosted. All sorted now, thanks. PM on way for a couple of adapters.

-------------
http://www.jumpnfire.com" rel="nofollow - jumpnfire.com

MOST WANTED:
- Atari Return of the Jedi upright cabinet.
- Atari Pole Position PCB's.


Posted By: neoretro
Date Posted: 05 Sep 2018 at 1:35pm
Don’t suppose you make an adapter that would allow me to connect the sound output on a Jamma board to the Stereo sound cable used with an Atomiswave do you?

Cheers


Posted By: kold666
Date Posted: 06 Sep 2018 at 12:47pm
I can make everything but it must be something that other people can be interested ;-)
When I design these pcbs, min order to produce them in a factory is for 5 pieces




Posted By: neoretro
Date Posted: 06 Sep 2018 at 3:36pm
Originally posted by kold666 kold666 wrote:

I can make everything but it must be something that other people can be interested ;-)
When I design these pcbs, min order to produce them in a factory is for 5 pieces





Thanks buddy. How many would 5 cost? I could then take on the responsibility of selling them?

Anyone out there looking for a Jamma to Atomiswave Stereo speaker adapter?


Posted By: minwah
Date Posted: 07 Sep 2018 at 9:52am
PM'd!


Posted By: kold666
Date Posted: 07 Sep 2018 at 11:22am
replied, sorry I didn't get notification ;)


Posted By: kold666
Date Posted: 07 Sep 2018 at 11:24am
Originally posted by neoretro neoretro wrote:

Originally posted by kold666 kold666 wrote:

I can make everything but it must be something that other people can be interested ;-)
When I design these pcbs, min order to produce them in a factory is for 5 pieces





Thanks buddy. How many would 5 cost? I could then take on the responsibility of selling them?

Anyone out there looking for a Jamma to Atomiswave Stereo speaker adapter?


I have first to design it and then ask a quote to the pcb producer.  It depends on how big the pcb will be
I am also not familiar with Atomiswave so I have to first check the manual

Just checked briefly , it has a 4 pin separate connector. Normally is better to use an AMP MODU1 connector and wire two RCA connectors that goes to the stereo speakers

Making a Jamma adapter a littleg bit of waste because you have only to make an extension of the jamma connector with a plug to wire the stereo signasl to pin 10 and 11 of Jamma, in a similar way to Neogeo 2 slots....




Posted By: kold666
Date Posted: 08 Sep 2018 at 4:48pm
added jamma adapter for Escape From The Planet of the robot monsters


Posted By: kold666
Date Posted: 28 Sep 2018 at 5:58pm
updated items on stock


Posted By: kold666
Date Posted: 06 Oct 2018 at 8:47am
updated stock list


Posted By: kold666
Date Posted: 11 Oct 2018 at 7:36pm
updated items on stock


Posted By: goatboy
Date Posted: 14 Oct 2018 at 3:05pm
PM for Nichibutsu JAMMA adapter


Posted By: kold666
Date Posted: 15 Oct 2018 at 2:25pm
update stock


Posted By: kold666
Date Posted: 21 Oct 2018 at 9:19am
Update with new Taito classics and SNK early 80s adapter


Posted By: kold666
Date Posted: 24 Oct 2018 at 8:04pm
update


Posted By: Amb47uk
Date Posted: 24 Oct 2018 at 8:58pm
 


Posted By: Amb47uk
Date Posted: 24 Oct 2018 at 9:02pm
Originally posted by neoretro neoretro wrote:

Originally posted by kold666 kold666 wrote:

I can make everything but it must be something that other people can be interested ;-)
When I design these pcbs, min order to produce them in a factory is for 5 pieces





Thanks buddy. How many would 5 cost? I could then take on the responsibility of selling them?

Anyone out there looking for a Jamma to Atomiswave Stereo speaker adapter?

i would go in for one too if that helps


Posted By: kold666
Date Posted: 25 Oct 2018 at 8:45am
It would be only a passthough adapter with 2 RCA sockets ( one goes to pin 10 and the other one to pin 11)
Could be used also for Neogeo 2 slots / 4 slots stereo

If I have time I can put a draft shortly


Posted By: neoretro
Date Posted: 25 Oct 2018 at 5:25pm
I’m not sure RCA would do it. The stereo cable that comes out of the Atomiswave motherboard to the speakers looks like this.

I don’t think there’s any RCA sockets or plus to connect to from the Jamma board. Unless I’ve misunderstood
.


Posted By: kold666
Date Posted: 25 Oct 2018 at 6:00pm
This is the edge pinout
http://consoles.cbueker.de/files/atomiswave-edge.gif

you can add directly on the jamma adapter two RCA connectors so you can connect directly the speakers.

I guess than pin 10 is used for MONO or when you select stereo sound, for LEFT Sound
pin 11 is for RIGHT speaker




Posted By: neoretro
Date Posted: 25 Oct 2018 at 9:26pm
Hi buddy.

I won’t take up too much more of your fantastic thread with this. But the Atomiswave Stereo pin out on the Atomiswave mother board is as follows. And it’s something that allows me to plug 10 & 11 wires from the Jamma loom into the male plug that goes into the stereo motherboard port that I need. I’ve been told it’d possibly need a mono to stereo switch as the Jamma is mono.

Appreciate all your help.

https://redcdn.net/hpimg15/pics/78731048t.gif



Posted By: kold666
Date Posted: 26 Oct 2018 at 10:06am
the only problem you will encouter is that on pin11 of jamma loom normally is nothing connected so you have to add a second speaker and solder on that pin.

With an RCA female plug you can connect normal speakers without having the trouble to solder anything.

Just to mention, than it's up to you which is the best way for your needs


Posted By: kold666
Date Posted: 04 Nov 2018 at 8:43am
updated stock


Posted By: Vamino
Date Posted: 12 Dec 2018 at 7:27pm
Do you have any Konami adapters available?

Thanks.


-------------
Insert Coin[s]


Posted By: kold666
Date Posted: 12 Dec 2018 at 8:55pm
Hi,
yes i have 5 on stock again, i just didnt have time to update the post yet


Posted By: Vamino
Date Posted: 12 Dec 2018 at 9:10pm
If it's suitable to play Time Pilot then I'd like one please.  Smile

Thanks.


-------------
Insert Coin[s]


Posted By: kold666
Date Posted: 17 Dec 2018 at 7:51pm
update with new version of Konami adapter, new Technos jamma adapter and new Taito Samurai adapter


Posted By: kold666
Date Posted: 24 Dec 2018 at 8:09am
updated with new adapter Seicross/Frisky Tom


Posted By: kold666
Date Posted: 12 Jan 2019 at 4:51pm
update with new Jamma Spinner interface and Nintendo Jamma Adatper


Posted By: kold666
Date Posted: 17 Jan 2019 at 2:38pm
added Taito Gladiator adapter


Posted By: mysticmonk
Date Posted: 17 Jan 2019 at 7:33pm
Just wanted to check:

Taito adapter will work for both bubble bobble and rainbow island?

Irem adapter will work for rtype?

Konami adaptor will work for nemesis?

Thanks :)


Posted By: John Bennett
Date Posted: 17 Jan 2019 at 8:18pm
Rainbow islands is standard Jamma, no adaptor needed.

-------------
http://www.philwip.com" rel="nofollow - http://www.philwip.com -sibling 'fix-off' (I’m losing by miles).


Posted By: mysticmonk
Date Posted: 17 Jan 2019 at 8:52pm
Doh! Just assumed they were so closely released to each other they were both non-jamma. Thanks!


Posted By: Flinnster
Date Posted: 18 Jan 2019 at 1:52am
R-Type is jamma also. You only need an Irem adaptor for much older Irem titles.


-------------


WTD: Outrun DLX(yes REALLY!), Rolling Thunder, PacMania
Parts WTD: Any Dino King / LnB / MushiKing Spare Parts!


Posted By: mysticmonk
Date Posted: 18 Jan 2019 at 1:30pm
Assumption is the mother of all...something or other! Thanks for that too, flinnster.

So, just the nemesis needs an adaptor.


Posted By: TWB
Date Posted: 18 Jan 2019 at 4:16pm
Originally posted by mysticmonk mysticmonk wrote:

Assumption is the mother of all...something or other! Thanks for that too, flinnster.

So, just the nemesis needs an adaptor.


yep Nemesis needs a Konami classic adaptor.

Kold666, makes a nice adaptor

-------------
WANTED
Cabs:
Leisure 2000
PCBs: Astro Invader (Stern)/Kamikaze (Leijac)
Parts: POLO 1 remote board loom


Posted By: kold666
Date Posted: 19 Jan 2019 at 8:55am
To sum it up, Bubble Bobble needs the Taito adapter and Nemesis the Konami adapters.
All the other games mentioned  , as stated by TWB, are already Jamma


Posted By: Alpha1
Date Posted: 19 Jan 2019 at 10:32am
Do you do discount for 5+ adapters?

-------------
Wanted: Time Traveller, GALAXIAN 3 THEATER, 80's Namco & Taito games



Posted By: kold666
Date Posted: 19 Jan 2019 at 12:26pm
Yes offcourse. I sent a pm


Posted By: mysticmonk
Date Posted: 28 Jan 2019 at 3:38pm
pm sent :)


Posted By: kold666
Date Posted: 28 Jan 2019 at 3:56pm
Replied


Posted By: mysticmonk
Date Posted: 28 Jan 2019 at 4:03pm
Originally posted by kold666 kold666 wrote:

Replied


I didn't receive message? Maybe try again :)


Posted By: agent4125
Date Posted: 28 Jan 2019 at 4:08pm
Also pm sent :)


Posted By: kold666
Date Posted: 28 Jan 2019 at 9:28pm
Originally posted by mysticmonk mysticmonk wrote:

Originally posted by kold666 kold666 wrote:

Replied


I didn't receive message? Maybe try again :)


Hi, I sent pm again :) let me know if you received it this time


Posted By: kold666
Date Posted: 02 Feb 2019 at 9:31am
updated items on stock and added Alpha Denshi jamma adapter and Data East Cassette Jamma adapter


Posted By: kold666
Date Posted: 14 Feb 2019 at 9:22am
new kangaroo adapter added


Posted By: kold666
Date Posted: 22 Feb 2019 at 11:58am
update stock and added Qbert bootleg jamma adapter


Posted By: kold666
Date Posted: 14 Mar 2019 at 12:12pm
updated with Sega System E jamma adapter


Posted By: kold666
Date Posted: 30 Mar 2019 at 11:48am
Added Taito Great Swordsman adapter


Posted By: mysticmonk
Date Posted: 30 Mar 2019 at 12:00pm
Hi Kold, do any of your adapters work for Capcom Black Tiger/Black Dragon?


Posted By: LHantz
Date Posted: 30 Mar 2019 at 12:03pm
Originally posted by mysticmonk mysticmonk wrote:

Hi Kold, do any of your adapters work for Capcom Black Tiger/Black Dragon?
 

That game is JAMMA (mine is anyway), so no adapter needed 


-------------
Collector for 25 years - New from '92 - Electrocoin Xenon SFII CE - Over 150 original PCBs - Darksoft Multi CPS2/Taito F3/Neo Geo/Irem M72 - JROK multi Williams


Posted By: mysticmonk
Date Posted: 30 Mar 2019 at 12:08pm
Oh, I just assumed that it needed an adapter because it looks like the typical Capcom "classic" board (like ghosts n goblins) and similar age, and no mention on the board of "jamma".

Once again I look foolish in this thread!


Posted By: LHantz
Date Posted: 30 Mar 2019 at 1:57pm
NP, it's sort of in between CPS1 like Sidearms which is also JAMMA



-------------
Collector for 25 years - New from '92 - Electrocoin Xenon SFII CE - Over 150 original PCBs - Darksoft Multi CPS2/Taito F3/Neo Geo/Irem M72 - JROK multi Williams


Posted By: kold666
Date Posted: 30 Mar 2019 at 2:30pm
Originally posted by mysticmonk mysticmonk wrote:

Oh, I just assumed that it needed an adapter because it looks like the typical Capcom "classic" board (like ghosts n goblins) and similar age, and no mention on the board of "jamma".

Once again I look foolish in this thread!


No problem, better to ask ;)


Posted By: mysticmonk
Date Posted: 31 Mar 2019 at 10:14pm
PM sent :)


Posted By: geotrig
Date Posted: 31 Mar 2019 at 11:55pm
Originally posted by mysticmonk mysticmonk wrote:

Oh, I just assumed that it needed an adapter because it looks like the typical Capcom "classic" board (like ghosts n goblins) and similar age, and no mention on the board of "jamma".

Once again I look foolish in this thread!


It might be a boot, black tiger should be keyed like a sad Janna board....biggest indicator is if it doesn't have some Capcom custom chips. There are some very clever boots out there


Posted By: mysticmonk
Date Posted: 01 Apr 2019 at 11:53am
Turned out to be a legit board, was just making bad assumptions and ignoring it :p


Posted By: mysticmonk
Date Posted: 11 Apr 2019 at 4:20pm
pm sent :)


Posted By: mysticmonk
Date Posted: 14 Apr 2019 at 5:51pm
I've bought a few adapters so far, and I just wanted to say they've been very good each time. Kold even gave me a few pointers for getting some games going.

Recommended :)


Posted By: kold666
Date Posted: 14 Apr 2019 at 9:21pm
Thanks a lot!


Posted By: kold666
Date Posted: 12 Jun 2019 at 11:44am
update with new adapters:
Pacman / Galaxian / Mooncresta
Atari Centipede
Atari Crystal Castles


Posted By: kold666
Date Posted: 20 Jun 2019 at 2:09pm
Update with Playchoice 10 Double monitor jamma adapter


Posted By: mysticmonk
Date Posted: 21 Jul 2019 at 5:32pm
Pm sent :)


Posted By: Monstermug
Date Posted: 21 Jul 2019 at 6:18pm
Bought a bunch of these adapters.  Very good quality and fast delivery too.  


Posted By: kold666
Date Posted: 21 Jul 2019 at 10:05pm
Thanks for feedback Smile


Posted By: kold666
Date Posted: 30 Jul 2019 at 12:55pm
Added Nintendo VS jamma adapter and updated items on stock


Posted By: mysticmonk
Date Posted: 06 Aug 2019 at 5:16pm
Got another bunch of adapters off Kold, once again all great on communication/shipping. Bump for quality stuff :)


Posted By: kold666
Date Posted: 01 Sep 2019 at 12:57pm
updated availability


Posted By: muddymusic
Date Posted: 01 Sep 2019 at 8:55pm
So nice to see the Escape from Planet of the Robot Monsters adapters....a bit late for me sadly as I already sold the board, but good to know you've got them in case I find another!


-------------
Repro Arcade Artwork supplier, pm me or visit arcadeartshop.com


Posted By: kold666
Date Posted: 02 Sep 2019 at 10:53pm
The adapter of escape from the planet was the very first one i ever designed.   


Posted By: Layer
Date Posted: 20 Sep 2019 at 8:45am
1 X TAITO Classics for Arkanoid/Elevator Action please.


Posted By: kold666
Date Posted: 25 Sep 2019 at 1:26pm
updated with new adapters:
Konami Gyruss edition with RCA connectors for stereo speakers
Bank Panic
MVS 2-4-6 slots jamma adapter
Le Bagnard / Bagman



Posted By: kold666
Date Posted: 05 Oct 2019 at 8:55am
Update with:
1)Jamma interface for playing some Neogeo games and Jamma games with a spinner ( Puzzle Bubble is really great!)
Also you can play Eco Fighter with Forgotten Worlds spinner if you are a lucky owner of this spinner.
With this setup Eco Fighters becomes in my opinion one of the best horizontal shooters from Capcom

2)Taito Space invaders hardware jamma adapter


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: Monstermug
Date Posted: 05 Oct 2019 at 12:19pm
Originally posted by kold666 kold666 wrote:

Update with:
1)Jamma interface for playing some Neogeo games and Jamma games with a spinner ( Puzzle Bubble is really great!)
Also you can play Eco Fighter with Forgotten Worlds spinner if you are a lucky owner of this spinner.
With this setup Eco Fighters becomes in my opinion one of the best horizontal shooters from Capcom

2)Taito Space invaders hardware jamma adapter
 

Is it compatible with taito arkanoid spinner? 


Posted By: kold666
Date Posted: 05 Oct 2019 at 2:34pm
You can play eco fighters with arkanoid spinner but you have to fire with a separate pushbutton ( the second one)
Forgotten worlds spinner is a spinner which can be pressed to fire.

Alternatively you can buy a joystick with a push button on top which you have to wire to the second button.


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: MK36
Date Posted: 10 Oct 2019 at 11:57am
a big thank you to Corrado for sorting me out the Combat school adapter , really helpful guy


Posted By: kold666
Date Posted: 10 Oct 2019 at 12:19pm
Thanks to you!

-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: SmoMo
Date Posted: 11 Oct 2019 at 12:26pm
Hello,

I have a 1979 Taito tabletop with a Falcon Video Hustler PCB inside.

It looks like the harness has already been modified to plug into the Hustler PCB, so I would like to do one of the following:

1) Have a Falcon Tabletop to Jamma adaptor, so I can plug JAMMA boards into my tabletop without having to rewire anything

2) Have a Falcon adapter for the Hustler PCB -> JAMMA . And then I can rewire the cabinet to a JAMMA harness.


Please can you let me know if you could supply an adapter for either of those options?

Thanks,
   Ben


Posted By: kold666
Date Posted: 12 Oct 2019 at 7:51am
I sent you a PM


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: kold666
Date Posted: 13 Oct 2019 at 12:37pm
updated with Crazy Climber Jamma Adapter


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: kold666
Date Posted: 23 Oct 2019 at 10:14pm
added these new adapters:
Nova 2001
Ninjakun
Roller Aces


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: kold666
Date Posted: 01 Nov 2019 at 8:28am
Added these adapters:
Zaccaria Money Money
Sega Tapper
Pengo



-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: pinball dunc
Date Posted: 24 Nov 2019 at 11:31am
hi how much for a jamma adapter for a nichibutsu moon base ? 


Posted By: kold666
Date Posted: 24 Nov 2019 at 7:07pm
Hi!
if it's the space invaders clone with 3 boards stack with one 18pin connector on top and one 18 pin on bottom you have to buy the space invaders one ( compatible with several clones).
do you have a picture of the pcb?


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: kold666
Date Posted: 24 Nov 2019 at 7:09pm
updated with Nichibutsu Moon Shuttle jamma adapter


-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/


Posted By: bonehead
Date Posted: 24 Nov 2019 at 7:36pm
What would postage be to the uk for 3 adapters?
Thanks
Steve

-------------
Always looking for a bargain.
Wanted., bezerk, mad planets.


Posted By: kold666
Date Posted: 24 Nov 2019 at 11:13pm
Hi,
Shipping rate up to three adapters is 13 euros with registered letter for all Europe.
Exceptions are the Nintendo VS or adapters which require extended harness: these costs something more, please ask.

-------------
https://arcadepcbfever.blogspot.com/" rel="nofollow - https://arcadepcbfever.blogspot.com/



Print Page | Close Window