Print Page | Close Window

Wanted small jamma pcb not sports games

Printed From: ukVac.com
Category: Trading Post
Forum Name: Wanted
Forum Description: Want something?
URL: http://www.ukvac.com/forum/forum_posts.asp?TID=373090
Printed Date: 06 Apr 2020 at 11:55am


Topic: Wanted small jamma pcb not sports games
Posted By: Shadow_Dancer
Subject: Wanted small jamma pcb not sports games
Date Posted: 10 Oct 2019 at 10:57am
Long story short I own a game elf multi game thing and it no matter what monitor settings I change it won’t fit the screen. I’m told this is a fault with the board not the cab so I’m after a cheap pcb. As it’s a cabaret cab it can’t be a very large pcb. And I hate sports game so can’t bring myself to spend money on them

-------------
'The man in black fled across the desert, and the gunslinger followed.'



Replies:
Posted By: Ronnie Dent
Date Posted: 10 Oct 2019 at 10:58am
What about a 60 in 1 ?


Posted By: mozie
Date Posted: 10 Oct 2019 at 11:05am
I don’t know about that? What’s the monitor type? Some have jumpers to set to wide/narrow.. I’ve had a game elf and it always fit the screen, the 60 in 1 and 19 in 1 however I could never get to fully fit on any of my cabs


Posted By: Ronnie Dent
Date Posted: 10 Oct 2019 at 11:27am
I have set up a few in 19" jamma cabs and never had an issue with image size


Posted By: Purity
Date Posted: 10 Oct 2019 at 11:46am
I use a World Rally pcb as a test PCB, as it is small and good for testing screen setup


-------------
http://www.arcadecollectors.co.uk" rel="nofollow">


Posted By: penrhos
Date Posted: 10 Oct 2019 at 12:22pm
Check video ground is connected on the edge connector. I haven't had problems with image size but I have had with sync and image position.



Posted By: mozie
Date Posted: 10 Oct 2019 at 12:57pm
or one of these cheap small sega test boards from yanton, 

https://www.ebay.ie/itm/NEW-SEGA-1990-City-Candy-JAMMA-Test-Board-837-7419/312138685498?hash=item48acea5c3a:g:K8oAAOSwICpaGXnW" rel="nofollow - https://www.ebay.ie/itm/NEW-SEGA-1990-City-Candy-JAMMA-Test-Board-837-7419/312138685498?hash=item48acea5c3a:g:K8oAAOSwICpaGXnW



Posted By: Bensonrad
Date Posted: 10 Oct 2019 at 10:58pm
Good to see you back on the forum Steve, do you have a picture of the cabaret cab, might help gauge PCB size, a cheap bootleg might suffice.

-------------
Wanted: ASTEROIDS CABARET or ASTEROIDS DELUXE CABARET, also looking for a Super Pacman Bezel, a Euro Millipede inner Bezel. WANTED: VECTREX



Print Page | Close Window