Sega outrun sound chip

I have an outrun pcb on which the sound chip has died. It is the surface mount chip found on outrun, Power Drift and loc type pcbs I think.

So looking for a working sound chip I would possibly buy a faulty pcb so long as the sound chip works. Sent the pcb and Retroclinic has verified the chip has died. Would love to get the game running again,

Cash or trades waiting.

Cheers
Steve

I am guessing it's the 315-5218, seems to be a common failure. It's found on hang on / super hang on too I believe.

Be careful with these... They are easily damaged.... Recommend using some Chip quick low melt solder to remove them safely !! - Killed one with hot air and chances are 50/50 doing a transplant !!  The pads are also very delicate and are easily damaged !!

Edited by ColinD - 11 Apr 2017 at 8:33pm

Top Board is the same for Super Hang On, but I'm sure you are aware of this. Deffo a good source is a bad Gloc / Power Drift pcb, also afterburner/thunderblade hardware too !! - Give the chip a good / scub clean before removal too !! - Alcohol and/or Acetone (cheap nail varnish remover - but not the acetone free stuff  £1 in a chemist)

Edited by ColinD - 11 Apr 2017 at 8:41pm

Don't suppse you can help with this by any chance?

I am guessing Mark already tried reflowing the original custom? The outrun I fixed the other week was playing the speech too fast so that it sounded like chipmunks, reflowing the 315-5218 fixed it.

If you want to pay the postage costs and for a new packet of chip quik I'll give it a go.

Thanks for the offer Craig. I have one but think a couple of the legs could be broken on it. It's on a g-loc Pcb.

I will dig it out and take another look.

Thanks.
Steve