Retroman839
Senior Member
Cool ..
Yeh I need to get a db15 snac to jamma then 👍🥳
Yeh I need to get a db15 snac to jamma then 👍🥳
Ali express Jamma/jvs de10 Nano
- Thread starter Retroman839
- Start date
pooman2084
Be Attitude For Gains!
No, I think you just need to put it in the right mode. The board is the db15 snac to jamma.
Retroman839
Senior Member
Ok
Or maybe I need a db15 to jamma
You think my jamma egdge is using the same lines as the db15 snac adaptor on my pcb ?
pooman2084
Be Attitude For Gains!
You definitely don’t need that. That is for adding snac arcade sticks.
Just thinking out loud, if this is a SNAC only device, it will NOT control menus and will only have 1 player. These are your symptoms right?
Just thinking out loud, if this is a SNAC only device, it will NOT control menus and will only have 1 player. These are your symptoms right?
Retroman839
Senior Member
I only have 1 player yes
It does control the menu though .
I have a button next to the jvs port I don’t know if that changes the controller modes ?
The very fact that it says joysticks is
Showing me that it is possible to add payer 2 ..
Both the toggle and the small red push switch I don’t know what they do ?
It does control the menu though .
I have a button next to the jvs port I don’t know if that changes the controller modes ?
The very fact that it says joysticks is
Showing me that it is possible to add payer 2 ..
Both the toggle and the small red push switch I don’t know what they do ?
Retroman839
Senior Member
I have only just noticed as well that I have a toggle for h sync & c sync !
It’s too busy this pcb!
It’s too busy this pcb!
It isnt, there as an additional Jamma Passthrough for connecting to the User port on the board you already have, its purchased separately.
This one - https://www.aliexpress.com/item/100...iJGI6RwI&utparam-url=scene:search|query_from:
Retroman839
Senior Member
Maybe this is what’s going on then
The switch is forcing mappings from p1 to p2 …
I will try flipping it back later
I have the Antoni usb to Jamma mister add on I’m sure that was fine with p1 & p2 Controlls auto recognised
The switch is forcing mappings from p1 to p2 …
I will try flipping it back later
I have the Antoni usb to Jamma mister add on I’m sure that was fine with p1 & p2 Controlls auto recognised
This is from the Mister.ini on the SD card that came with my Rev F.
; JammaSD/J-PAC/I-PAC keys to joysticks translation
; You have to provide correct VID and PID of your input device
; Examples: Legacy J-PAC with Mini-USB or USB capable I-PAC with PS/2 connectors VID=0xD209/PID=0x0301
; USB Capable J-PAC with only PS/2 connectors VID=0x04B4/PID=0x0101
; JammaSD: VID=0x04D8/PID=0xF3AD
jamma_vid=0x04D8
jamma_pid=0xF3AD
; Disable merging input devices. Use if only player 1 works.
; Leave no_merge_pid empty to apply this to all devices with the same VID.
no_merge_vid=0x045E
no_merge_pid=0x028E
; JammaSD/J-PAC/I-PAC keys to joysticks translation
; You have to provide correct VID and PID of your input device
; Examples: Legacy J-PAC with Mini-USB or USB capable I-PAC with PS/2 connectors VID=0xD209/PID=0x0301
; USB Capable J-PAC with only PS/2 connectors VID=0x04B4/PID=0x0101
; JammaSD: VID=0x04D8/PID=0xF3AD
jamma_vid=0x04D8
jamma_pid=0xF3AD
; Disable merging input devices. Use if only player 1 works.
; Leave no_merge_pid empty to apply this to all devices with the same VID.
no_merge_vid=0x045E
no_merge_pid=0x028E
pooman2084
Be Attitude For Gains!
Thanks fella, I at the just guessing stage now trying to help remotely!
Did you use the SD card that came with it without changing anything?
There is controls mapping file in controls\input\ on the SD card, if you havent used that then that could be your problem as well.
There is a download of the mister.ini and the controls map file on the arcade projects forum you can copy to you sd card. Post #16
www.arcade-projects.com
There is controls mapping file in controls\input\ on the SD card, if you havent used that then that could be your problem as well.
There is a download of the mister.ini and the controls map file on the arcade projects forum you can copy to you sd card. Post #16
(SQ ARCADE) MiSTer FPGA TO JAMMA/JVS/SNAC-DB15 - MiSTer for JAMMA/JVS/SNAC-DB15 Arcade cabinets
integrated JAMMA cabinet, JVS cabinet, fully supported MiSTer FPGA expander, Two-channel Xinput high-speed controller, input control can be set to lock player 1 and player 2. Control can exchange input mapping between player 1 and player 2 at any time without restarting the machine. The video...
www.arcade-projects.com
Retroman839
Senior Member
thank you fantasia ,
I did suspect the merging had something to do with it ,
But I do not understand the wording?
Sounds like I need to disable merging
Right ?
Leave no merge pid empty /
I deleted the pid code .
Tried again to difine player 2
I no dice
I did suspect the merging had something to do with it ,
But I do not understand the wording?
Sounds like I need to disable merging
Right ?
Leave no merge pid empty /
I deleted the pid code .
Tried again to difine player 2
I no dice
Last edited:
Why not try editing the mister.ini with the information I posted, exactly as its posted.
Also if you didnt use the provided SD card and setup one from scratch you may need the key mapping file in the zip file from arcade projects that I linked to.
The controls map file provided by the maker of the card should have all the controls already correctly mapped.
pooman2084
Be Attitude For Gains!
And you will NOT be asked to map p2 in MiSTer! You will map p1 and p2 will be done automatically.
But yes, follow @Fantazia2 instructions exactly. Let’s do the basics first.
But yes, follow @Fantazia2 instructions exactly. Let’s do the basics first.