-5v Advice

acidburn

Active member
Feedback
2 (100%)
Credits
131CR
I want to test a jamma board that doesn't doesn't use -5v however my jamma edge connect has -5v connected to it and it's a pain in the arse removing the molex pin that connects the -5v to my power supply.

My question is if I leave the -5v line connected will it damage the board?

Thanks
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
Short answer - no. Slightly longer answer - noooooo
smiley36.gif
 

acidburn

Active member
Feedback
2 (100%)
Credits
131CR
*edit*

I read that wrong. So you're saying it won't damage the board even with -5 connected? Would you mind explaining
smiley1.gif

acidburn2015-08-06 20:38:49
 
Top