I've borrowed an AR2 and a power brick for my asteroids test rig but now (after a few years) am thinking its time to give it back.
So I'd like to use a switcher and an AC transformer, (something like this) and I'm concerned about a couple of things;
1. How much current does the 36VAC transformer need to supply?
2. Common Ground - the transformers I'm looking at are twin 120v input and twin 18V output, my understanding is that I connect the inner poles of the two primaries together and the outer poles to mains. Then wire the two inner poles of the secondaries together and connect that to the ground of the switcher, and use the outer poles of the secondaries to supply 36VAC to the PCB.
3. Does the circuit need anything else? Looking at the wiring diagram from asteroids it doesn't look like it, but never hurts to check.
Definitive answers appreciated before I blow something up.
So I'd like to use a switcher and an AC transformer, (something like this) and I'm concerned about a couple of things;
1. How much current does the 36VAC transformer need to supply?
2. Common Ground - the transformers I'm looking at are twin 120v input and twin 18V output, my understanding is that I connect the inner poles of the two primaries together and the outer poles to mains. Then wire the two inner poles of the secondaries together and connect that to the ground of the switcher, and use the outer poles of the secondaries to supply 36VAC to the PCB.
3. Does the circuit need anything else? Looking at the wiring diagram from asteroids it doesn't look like it, but never hurts to check.
Definitive answers appreciated before I blow something up.