Atari Missile Command Voltage Selection

[Stickman]

So I have a MC and it is currently running on 110v (US Import) via a step down.

Reading the manual you can select the line voltage by changing the relevant plug on the power brick.

So is it really as easy as plugging in the red plug so I can run it without the step down?

Pretty sure it is there tie wrapped like the picture below.

 

[aeroflott]

Yes indeed sir.

 

[Stickman]

cheers, i will probably unplug the boards and just check everything seems happy voltage wise - just in case.

 

[Stickman]

So this is the current setup for 110v

And this is supposed to be the 220v setting, I would have expected a difference in the plug jumper as it utilises a different tapping on the transformer.

I bottled it and did not try it like this with 220v, maybe just get another step down. Be cheaper than blowing stuff up