Chihiro CF question

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
OK, been playing about with the CF stuff today. Official kit. Got it working quite happily on a Naomi 2 motherboard, works like a charm but Chihiro is a different matter.

After a bit of pissing about I realised that I probably need to update the firmware of the actual system to take the 4.01 compact flash stuff. So I netboot it on and am greeted with this lovely red screen...

So, before I waste any more time, question: Can a type 1 Chihiro even support compact flash at all ???

Curious as to why it's bitching about the media board. Though I do get a bit confused between DIMM boards and media boards
smiley36.gif


WP_000225.jpg
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Yur - and Setch and Craig. Hopefully one of them will chip in.

I was hoping to use the network cable for a media centre PC instead but everything I'm reading leads me to guess the answer is probably that it's only supported on Type 3 only and the machine is just sitting there not used (already!) most of the time so it's really not worth the cost of a type 3 main board.

If that's the case then it does obviously lead to the obvious next question - can a type 1 be converted to a type 3 by changing the media board alone, or is there more to it than that?? I'll admit that while I have Naomi 2 fairly sussed now, Chihiro and Triforce confuses me somewhat still.

guddler2013-09-14 22:29:22
 

JohnnyChaos

Blows own trumpet for CHQ cabs
Feedback
4 (100%)
Credits
325CR
no it can't... not unofficial anyway.
I do have the CF firmware upgrade disk for a chihiro if you need it, you can run unofficial CF hardware, but you still need the official CF cards.

Same goes for Triforce.. official cards only.
JohnnyChaos2013-09-14 22:55:21
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Probably not worth the effort then to be honest. BUT...

What's up with my system then? I'm trying to do the FW update now and its refusing it...
 

AndyGeezer

Active member
Feedback
1 (100%)
Credits
599CR
Type1 chihiro and trifore do not support CF firmware.

Sega only did the Naomi firmware on the net dimms. Chihiro and Triforce use the dimm differently.

Only solution is to swap old top section with a type3 section, but you'll be locked to official CF cards or my ssd units.
 

IDCHAPPY

KANFU Master
vacBacker
Feedback
9 (100%)
Credits
1,523CR
AndyGeezer said:
Type1 chihiro and trifore do not support CF firmware.

Sega only did the Naomi firmware on the net dimms. Chihiro and Triforce use the dimm differently.

Only solution is to swap old top section with a type3 section, but you'll be locked to official CF cards or my ssd units.

SSD? as is solid state drive thingys? they are pretty fast when compared to the rest aren't they?
smiley1.gif
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Thanks for clarifying.

In my case then it's probably just not worth the expense. I've already got an official Sega CF kit that works fine with Naomi 2 and there's only 2 games that I'm interested in on Chihiro (CTHR & OR2) so I guess I'll stick with a network cable and sell the CF kit. Far cheaper option is to put a network switch in to give me more cables
smiley36.gif


Is the SSD solution still limited to the speed of GD-ROM though, just like compact flash?
 

Ordyne

Active member
vacBacker
Feedback
5 (100%)
Credits
1,282CR
Loading on CF etc is better on chihiro but not my a big margin..

If you want to play CTHR you're better off sticking to type 1, there's a patched version of CTHR that works on type 3 but it doesn't always run.

You do need to play OR2SP rather then OR2 tho :)
 

JohnnyChaos

Blows own trumpet for CHQ cabs
Feedback
4 (100%)
Credits
325CR
my type 3 chihiro is the only system I've got were the battery seems to work great. So loading times aren't really an issue.
had or2 in it for 3 weeks recently and only had to load it up once. :)
 
Top