CMOS static ram

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Hi, if a board needs a new CMOS static ram does it need to be programmed?

Sounds a silly question but I was asked it today as didn't know the answer.

Cheers,
Steve
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,009CR
no

if it is battery backed, for high scores etc, then hopefully the program will realise it is not initialised and sort it out for you (they normally have a checksum or similar)
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Hi as far as I am aware it is a chip on a sega board and it hasn't got a bettery backup.
If I find out anymore info from him I will report back.

Cheers.
Steve
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,009CR
if it is not battery backed you should be able to use any static ram (pin compatible of course) - so you could use a 2101 instead of a 5101 for instance - you need the CMOS bit to use low power for the battery backup side of things.
 
Top