CPS-3 SH2 Help needed

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
I lost a trace oupn removal of the SH2 chip and need help to find a via for it

does anyone know the via for pin 111

thanks

2014-03-19%2017.38.05%20HDR.jpg
silverfox07862014-03-19 18:29:21
 

retrorepair

Active member
vacBacker
Feedback
26 (93%)
Credits
378CR
Doesn't look like it goes anywhere but would need a better pic to say for sure.

Lots of ICs have pads just there to help secure the chip and are usually the first to come clean off. This looks like one of them.
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
i have tried and tried with all my eyesight to see if it did go anywhere or if anything was coming into it and i just cant for the life of me see
i was also thinking the same that it may just be one of those NC pins

Mitsarugi would be the best man to say for sure but hes prob in bed right now
 

retrorepair

Active member
vacBacker
Feedback
26 (93%)
Credits
378CR
Well looking at my cart here I can verify there's no trace coming from that pin so unless it's connected to that ground plane behind it I think you are ok.
 
Top