Baiterhater
Active member
- Credits
- 73CR
Ok so i could do with a little help, i have been pouring some serious love into a defender with a total restoration which ill post some pic up on here shortly its had a complete respray.
The very first game it repaid me by crapping out mid game at 100k, oh well thats 80's electronics.
I have traced the fault to the rom board, turn the game on and i get the start up sound and a continuous rug no led's on the rom.
I had a little probe around the rom and noticed that i had no outputs at all from IC 17 (74ls395) on pins 12-15 yet good pulsing inputs on pins 3 to 6, pin 10 clocks the 395 when low and this is held high so i guess this is why i have no outputs.
Tracing pin 10 back it comes through an or gate at IC14 and pin 9 of this is held high this comes from IC15 which is a 74139 decoder. inputs 2 & 3 are pulsing nicely and so is the enable at pin 1 yet 5 & 6 are both held high so my thoughts are suspect IC 15 ?
Im a little rusty been out for a while but still know my way around a meter and logic probe so any help muchley appreciated
Cheers
J
The very first game it repaid me by crapping out mid game at 100k, oh well thats 80's electronics.
I have traced the fault to the rom board, turn the game on and i get the start up sound and a continuous rug no led's on the rom.
I had a little probe around the rom and noticed that i had no outputs at all from IC 17 (74ls395) on pins 12-15 yet good pulsing inputs on pins 3 to 6, pin 10 clocks the 395 when low and this is held high so i guess this is why i have no outputs.
Tracing pin 10 back it comes through an or gate at IC14 and pin 9 of this is held high this comes from IC15 which is a 74139 decoder. inputs 2 & 3 are pulsing nicely and so is the enable at pin 1 yet 5 & 6 are both held high so my thoughts are suspect IC 15 ?
Im a little rusty been out for a while but still know my way around a meter and logic probe so any help muchley appreciated
Cheers
J