Deflection yoke sockets

urbanledge

Active member
Feedback
2 (100%)
Credits
95CR
Do you know the way there's usually 2 sockets for the deflection coils?
would I be right in saying the 2nd sockets reverses the picture for use with a mirror or something?

Cheers!
 

urbanledge

Active member
Feedback
2 (100%)
Credits
95CR
On the polo im working on there's only one set of cables from the deflection coils going to one male connector.
There is 2 female sockets side by side on the chassis.

TBH my real question is can damage be done by connecting them to the "wrong" socket?

they are both the same socket.both can only be connected one way.

Thanks!
 

Jope

Newbie
Credits
19CR
I've only seen that on Hantarex monitors, the other connector has the wires flipped and the other has them straight.

The connector should only mate in one orientation, so you shouldn't be able to burn anything by plugging it into the other one, but be sure to always power down the monitor before you unplug the yoke connector, else you will most probably burn your chassis.
 
Top