EPROM burning help

DataEast77

Active member
Feedback
14 (100%)
Credits
59CR
Hey guys, i'm trying to burn a new Mitsubishi M5L27128K eprom for my faulty tiger heli pcb (rom 0) i've tried burning the mame binary file to various verified blank eproms of the same type but each time i get a program fail message.
I have tried this in both my Leper-48 and Wellon vp-290 programmers with the same results.

Seems i can burn the same file to other eproms with no problems, i read somewhere about these chips requiring 21v to program which the usb programmers struggle to meet but i'm using an external psu with both...any ideas?

Thanks.

Mike.

DataEast772016-05-02 22:23:47
 

VectorGlow

Active member
vacBacker
Feedback
34 (100%)
Credits
900CR
Yeah, I've found that before with those EPROMs. However, if you carry on programming it you'll find that it programs a little more each time - it gets there in the end, it's just tedious.
 

DataEast77

Active member
Feedback
14 (100%)
Credits
59CR
thanks a lot that did the trick
smiley20.gif
 
Top