Fwd: Sega out run Deluxe
- Thread starter netdent
- Start date
is there a purpose to this? or do you just enjoy sending blank
messages to the list
On 29/10/06, Ronnie Dent <netdent@yahoo.com> wrote:
>
>
> Note: forwarded message attached.
>
> ---------------------------------
> Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
>
>
messages to the list
On 29/10/06, Ronnie Dent <netdent@yahoo.com> wrote:
>
>
> Note: forwarded message attached.
>
> ---------------------------------
> Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
>
>
Hi guys, just got a out run deluxe, has some issues! its all working but the graphics have a problem, everything is displayed as it should no blocks etc, but the scrolling road is not correct especialy on bends, anyone have any ideas? voltage seem ok at 5.7 volts, ram rom test is ok, or does anyone have a working boardset.
cheers Ronnie
Mike Green <mikedx@gmail.com> wrote: is there a purpose to this? or do you just enjoy sending blank
messages to the list
On 29/10/06, Ronnie Dent <netdent@yahoo.com> wrote:
>
>
> Note: forwarded message attached.
>
> ---------------------------------
> Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
>
>
cheers Ronnie
Mike Green <mikedx@gmail.com> wrote: is there a purpose to this? or do you just enjoy sending blank
messages to the list
On 29/10/06, Ronnie Dent <netdent@yahoo.com> wrote:
>
>
> Note: forwarded message attached.
>
> ---------------------------------
> Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
>
>
Quoting Ronnie Dent <netdent@yahoo.com>:
> Hi guys, just got a out run deluxe, has some issues! its all working
> but the graphics have a problem, everything is displayed as it
> should no blocks etc, but the scrolling road is not correct
> especialy on bends, anyone have any ideas? voltage seem ok at 5.7
> volts, ram rom test is ok, or does anyone have a working boardset.
>
> cheers Ronnie
Ih ope you aren't measuring 5.7 volts on the pcb itself... that is
Waaaaaaaay too high and would cause certain IC's to fritz out.
Adjust the 5v level as measured on the pcb to 5.05 to 5.1 volts or
thereabouts, outrun is a thirsty pcb, but not 5.7volts thirsty.. that
will damage something..
Andrew Welburn
__._,_.___
Messages in this topic (5) Reply (via web post) | Start a new topic
> Hi guys, just got a out run deluxe, has some issues! its all working
> but the graphics have a problem, everything is displayed as it
> should no blocks etc, but the scrolling road is not correct
> especialy on bends, anyone have any ideas? voltage seem ok at 5.7
> volts, ram rom test is ok, or does anyone have a working boardset.
>
> cheers Ronnie
Ih ope you aren't measuring 5.7 volts on the pcb itself... that is
Waaaaaaaay too high and would cause certain IC's to fritz out.
Adjust the 5v level as measured on the pcb to 5.05 to 5.1 volts or
thereabouts, outrun is a thirsty pcb, but not 5.7volts thirsty.. that
will damage something..
Andrew Welburn
__._,_.___
Messages in this topic (5) Reply (via web post) | Start a new topic
Steve Clark
User
- Credits
- 0CR
Don't know if it would help at all, but there's a rar containing .tif
scans of the deluxe manual at
http://www.clarkweb.co.uk/manuals/outrundeluxemanual.rar
if anyone wants it.
16MB includes the wiring diagram.
Steve
__._,_.___
Messages in this topic (6) Reply (via web post) | Start a new topic
scans of the deluxe manual at
http://www.clarkweb.co.uk/manuals/outrundeluxemanual.rar
if anyone wants it.
16MB includes the wiring diagram.
Steve
__._,_.___
Messages in this topic (6) Reply (via web post) | Start a new topic
Thanks Andy, will reduce it now, I guess i best re seat all the chips before i condem the board, if anyone has one for sale let me know.
cheers Ronnie
Andrew Welburn <andy@andysarcade.net> wrote:
Quoting Ronnie Dent <netdent@yahoo.com>:
> Hi guys, just got a out run deluxe, has some issues! its all working
> but the graphics have a problem, everything is displayed as it
> should no blocks etc, but the scrolling road is not correct
> especialy on bends, anyone have any ideas? voltage seem ok at 5.7
> volts, ram rom test is ok, or does anyone have a working boardset.
>
> cheers Ronnie
Ih ope you aren't measuring 5.7 volts on the pcb itself... that is
Waaaaaaaay too high and would cause certain IC's to fritz out.
Adjust the 5v level as measured on the pcb to 5.05 to 5.1 volts or
thereabouts, outrun is a thirsty pcb, but not 5.7volts thirsty.. that
will damage something..
Andrew Welburn
---------------------------------
Check out the New Yahoo! Mail - Fire up a more powerful email and get things done faster.
cheers Ronnie
Andrew Welburn <andy@andysarcade.net> wrote:
Quoting Ronnie Dent <netdent@yahoo.com>:
> Hi guys, just got a out run deluxe, has some issues! its all working
> but the graphics have a problem, everything is displayed as it
> should no blocks etc, but the scrolling road is not correct
> especialy on bends, anyone have any ideas? voltage seem ok at 5.7
> volts, ram rom test is ok, or does anyone have a working boardset.
>
> cheers Ronnie
Ih ope you aren't measuring 5.7 volts on the pcb itself... that is
Waaaaaaaay too high and would cause certain IC's to fritz out.
Adjust the 5v level as measured on the pcb to 5.05 to 5.1 volts or
thereabouts, outrun is a thirsty pcb, but not 5.7volts thirsty.. that
will damage something..
Andrew Welburn
---------------------------------
Check out the New Yahoo! Mail - Fire up a more powerful email and get things done faster.
Thanks for that Steve, may be useful as lots of bits and pieces need doing
cheers Ronnie
Steve Clark <ukvac@clarkweb.co.uk> wrote:
Don't know if it would help at all, but there's a rar containing .tif
scans of the deluxe manual at
http://www.clarkweb.co.uk/manuals/outrundeluxemanual.rar
if anyone wants it.
16MB includes the wiring diagram.
Steve
---------------------------------
Get your email and see which of your friends are online - Right on the new Yahoo.com
cheers Ronnie
Steve Clark <ukvac@clarkweb.co.uk> wrote:
Don't know if it would help at all, but there's a rar containing .tif
scans of the deluxe manual at
http://www.clarkweb.co.uk/manuals/outrundeluxemanual.rar
if anyone wants it.
16MB includes the wiring diagram.
Steve
---------------------------------
Get your email and see which of your friends are online - Right on the new Yahoo.com