Grounding / Earth Query

Hitesh

Active member
Feedback
6 (100%)
Credits
207CR
Hello All

As you will soon see, I know very little about electric and understand even less.

I have a Mame Setup with a 29" VGA Monitor.

I have three ground wires : One from the monitor, one from the chassis and one from the remote pots board.

(1) Can I link all three?

(2) Can I connect them to one "earthing" block?

(3) Can the earthing block just sit on the base of the painted metal cabinet? The cabinet has "rubber" wheels.

My questions making sense?

Hitesh
 

obcd

Active member
Credits
3,830CR
The idea of the ground connections is to prevent a user to get a shock when some metal part of the machine connects to the mains. (due to bad isolation of the mains wires or a bad component)

So, yes, you should link all ground wires together.

You can connect them to one earthing block.

Yes, it can sit on the base of the painted metal cabinet. Normally, you should remove the paint around that screw so that the cabinet becomes grounded as well.

It's very important that all those ground connections are connected to the mains earth as well, so you always need to use a 3 wire mains cable. (Live Neutral and Earth)

All Earth / Ground wires normally have a typicial green / yellow isolation color to clearly identify them.

If you have a normal desktop pc in your mame cabinet, it should have a ground connection on it's power cable. If you don't connect it to mains earth, you can even measure some voltage on the pc

metal case which is connected to that ground as well.
 
Top