I need to burn a rom, the rom I wish to replace on a faulty board is a:- B8706 NMC27C256Q 250
I found what I thought was a replacement and erased it all ok (checked with Galep32)
I went onto maws and compared the CRC until I found the exact rom I need.
Downloaded the mame rom and extracted the piece I need,
I can load it into Galep32 so I can see the data, (chose a NMC27C256 as no Q on the end in the Galep National eprom model section)
I then click prog and it says error program failed??
Looking at the chip I'm trying to program it says:-
B8724 (and then the rest is the same) NMC27C256Q 250
What does the "B" number refer to? Am I trying to burn to the wrong type of eprom?
Sorry never programmed a rom before (Eprom eraser only arrived today)
My Galep4 reads fine, verifys fine, even checks blanks ok, just not able to write to it.
I can tell you all the details of the rom I'm trying to burn, or can anyone send me a rom to try (which you know will be ok on that chip) and tell me the settings just so I can make sure my Galep is ok?
I'm sure it is...as it passes all tests, both when it loads up and in the test menu part.
I need to understand how to prog roms to get any further, I'm happy once I've done one that i'll be ok in the future just wanna get the first one under my belt.
Ta
Paul.
I found what I thought was a replacement and erased it all ok (checked with Galep32)
I went onto maws and compared the CRC until I found the exact rom I need.
Downloaded the mame rom and extracted the piece I need,
I can load it into Galep32 so I can see the data, (chose a NMC27C256 as no Q on the end in the Galep National eprom model section)
I then click prog and it says error program failed??
Looking at the chip I'm trying to program it says:-
B8724 (and then the rest is the same) NMC27C256Q 250
What does the "B" number refer to? Am I trying to burn to the wrong type of eprom?
Sorry never programmed a rom before (Eprom eraser only arrived today)
My Galep4 reads fine, verifys fine, even checks blanks ok, just not able to write to it.
I can tell you all the details of the rom I'm trying to burn, or can anyone send me a rom to try (which you know will be ok on that chip) and tell me the settings just so I can make sure my Galep is ok?
I'm sure it is...as it passes all tests, both when it loads up and in the test menu part.
I need to understand how to prog roms to get any further, I'm happy once I've done one that i'll be ok in the future just wanna get the first one under my belt.
Ta
Paul.