HELP G07 in Defender Shaking Horizontally

[Dave2084]

[ukvac] HELP G07 in Defender Shaking Horizontally
The last few days my G07 has started shaking in the horizontal (left -
right) plane. at first it was hardly noticeable, but now at times you
can't even play the game. (

Has anyone any ideas on a possible problem?
Could it be a sync problem, caused by the output from the Defender
CPU/video board? I can test this as I have a set of staragte boards I
can fit.

I have an electronics background, but I know absoloutely nothing
about monitors! I should have no probs getting test equipment.

The monitor also has the following minor problems:

Edge of picture does not reach right hand side.
The usual burn in (from a Missile Command!)
Everything slopes slightly downhill from left (highest) to right
The blue is slightly high and right of the others, getting worse at
the bottom of the screen.

By coincidence I've just been dontaed a manual for it!
(thanks Ivan) hope it arrives soon.

If anyone has a good G07 that they can sell me (in UK only please) let
me know.

Thanks in advance )

Dave

Email: Dave@thepubagain.u-net.com

------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/list/ukvac
Free Web-based e-mail groups by eGroups.com

 

[Dave2084]

[ukvac] Re: HELP G07 in Defender Shaking Horizontally
At 02:44 pm 27 01 1999, you wrote:

>> The last few days my G07 has started shaking in the horizontal (left -
>> right) plane. at first it was hardly noticeable, but now at times you
>> can't even play the game. (
>Sorry I can't help, but if you get anywhere with this I'd be interested. My
>Defender has the same problem. Comes and goes randomly. I asked about this
>on the newsgroups ages back but didn't get anywhere.

I'll keep you informed . . . I asked around a few of the guys at work who
know about CRT's and they recon it'll be a Capacitor about to go down?

To be honest I'd sooner swap it for a *nice* G07 (or a NEW monitor if this
is possible) as mine has a few niggling problems and is the main thing that
lets my Defender/Stargate Down, but fixing is of course an option too.

Dave Langley

------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/list/ukvac
Free Web-based e-mail groups by eGroups.com

 

[MarbleMad]

[ukvac] Re: HELP G07 in Defender Shaking Horizontally
In article <4.1.19990127183036.00931eb0@mail.u-net.com>, Dave Langley
<dave@thepubagain.u-net.com> writes
>I'll keep you informed . . . I asked around a few of the guys at work who
>know about CRT's and they recon it'll be a Capacitor about to go down?
I know <NOTHING> about this but on the arcade mailing list they're
discussing a similar problem and the answer is always the same....

Zanen Electronics
MONITOR GET-WELL KITS
SAVES TIME AND MONEY ON MONITOR REPAIRS
Monitor repair kits take care of picture warping, blacking out,
smearing,
low brightness and brightness problems, poor regulation, jail bars,
vertical
shrinking, etc. Call for FREE technical help with your monitor problems.
All
kits come with instruction and are easy to install.
-------------
Zanen Electronics
5023 52nd Street
Lubbock, TX 7914
Phone: 806 793 6337
Fax: 806 793 9136

Visa and Mastercard accepted.
Discount! Buy any 10 kits and take $1.00 off each kit.
Free shipping for orders over $25.00

Monitor repair kits which are currently available:

101 For Electrohome G07-CBO 19" color monitor.
Includes 17 parts. $7.95 ea.

102 For Electrohome G07-FBO 13" color monitor.
Includes 16 parts. $7.95 ea.

103 For Electrohome G19-411 13" color monitor.
Includes 21 parts. $7.95 ea.

104 For Electrohome G802/805 19" B&W X-Y monitor.
Includes 9 parts. $4.95 ea.

105 For Electrohome G19-CC0 13" and 19" color monitor.
Includes 20 parts. $7.95 ea.

110 For Electrohome G08-003 19" X-Y color monitor.
Includes 4 deflection trans. 19 parts. $8.95 ea.
[NOTE: These are NOT the correct deflection transistors]

201A For Wells-Gardner K4600 series 19" color monitor.
Includes brightness control. 21 parts. $6.95 ea.

202 For Wells-Gardner K4900 series 19" color monitor.
Includes 16 parts. $7.95 ea.

203 For Wells-Gardner K4800 series 13" color monitor.
Includes 16 parts. $7.95 ea.

204 For Wells-Gardner K7000 series 13", 19", and 25" color monitors.
Includes 15 parts. $6.95 ea.

206 For Wells-Gardner 19K6100 X-Y 19" color monitor.
Includes 30 parts. Includes 6 deflection transistors. $14.95 ea.

207 For Wells-Gardner K4500 series color monitor.
Includes 18 parts. $6.95 ea.

208 For Wells-Garder 19V2000 19" B-W X-Y monitor.
Includes 11 parts. $4.95

301 For Nintendo Sanyo 20-ezv(r-b,v) 19" color monitor.
Includes 16 parts. $6.95 ea.

302 For Nintendo Sharp XM-1801N or XM-2001N 19" color monitor.
Includes 24 parts. $7.95 ea.

303 For Sanyo 14" color monitor.
Includes 14 parts. $6.95 ea.

401 For Atari Disco 2090DT-2B 19" color monitor.
Includes 14 parts. $6.95 ea.

402 For Atari Disco AGM20M 19" medium resolution color monitor.
Includes 21 parts. $7.95 ea.

501 For WICO Videomaster 10" and 19" color monitors.
Includes 22 parts. $7.95 ea.

510 For Imperial 13" #44-4013 and 19" #44-4019.
Includes 21 parts. $7.95 ea.

530 For Ceronix model 1492 19" color monitor.
Includes 16 parts. $6.95 ea.

601 For Korean Telcom AK901 9" and 13" color monitors.
Includes 24 parts. $9.95 ea.

602 For Sharp Image OC-1411 13" and 19" color monitors.
Includes 19 parts. $7.95 ea.

603 For Sega MC-2000 13" and 19" color monitors.
Includes 24 parts. $7.95 ea.

604 For Sampo model KGR-1901 19" monitor.
Includes 20 parts. $7.95 ea.

605 For QNIC model CGM-2500 25" color monitor.
Includes 21 parts. $7.95 ea.

606 For Sharp Image model 0C-2022 19" color monitor.
Includes 25 parts. $7.95 ea.

608 For Sharp Image model SI-327 27" color monitor.
Includes 25 parts. $8.95 ea.