Jamma extension loom problem

tonyg64

Newbie
Credits
22CR
Hi, I received my new Jamma extension cable this morning and when I plugged it in the screen had a snow storm going on. The game was still on and sound was normal. I tried the screen adjustment pots but no improvement. Plugging the board back to the cabinet loom all worked as before. Any ideas guys?
The vendor is not open to take my call today.

Cheers

Tony
 

tonyg64

Newbie
Credits
22CR
ok on pin 14 of the extension there is a red wire on the solder side , nothing on the parts side. I went back to the link and I ordered this loom WITHOUT a video ground!. Why would this be sold like this? It says for candy cabs this will need a wire soldering on. Im not aware mine as mine as a candy cab. Bit peeved now.
smiley18.gif


So indeed you clever chaps have correctly diagnosed it
smiley20.gif


Tony
 

vib_ribbon

Active member
Feedback
5 (100%)
Credits
488CR
wait until you start playing neo geo mvs games, you'll ask, why does the extension not have button 4? =)

to me, it's just lazy and cost saving gone too far. all the pins should be connected in my books.
 

tonyg64

Newbie
Credits
22CR
Fixed! I nipped up workshop and got some car wiring and soldered it in. Works a beaut again
smiley20.gif
. as you say its cost cutting. Newbs like me are going to be constantly caught out by this sort of thing. Good job you guys are here
smiley32.gif


Cheers

Tony
 

Flinnster

The Dino King
vacBacker
Feedback
29 (100%)
Credits
2,566CR
Great stuff mate - glad you got it sorted.
I have to say about 8 out of 10 times, 'snow' on monitors seems to be related to ground issues somewhere on the cab ;)
 
Top