I have faulty K1 and KI2 boards blue screen on both,i still have a working KI2 BOARD so swapped hard drives,hard drive from faulty board works on the other board also from diagnostic screen no faults,cpu test ok hard drive ok roms ok,will not boot just blue screen.KI1 board blue screen no replacement hard drive for that one,but have full set of roms for ki2 swapped roms on too KI1 board and k12 hard drive have interface which goes between hard drive and board which converts KI1 BOARD TO K12 BOARD still blue screen,diagnostic screen same as other board cpu ok,roms ok,hard drive ok.All this would lead you to believe there is fault on both boards,all voltages are correct at jamma connector which they would be because spareKI2 board works but i did check anyway