lock picking

Hello guys, would like some advice with what pick you use for these tubular locks, I went cheap to start with and brought myself a good 7.8 lock pick - total waste of time, had received 3 of these all with the wrong internal diameter coming out from 7.3-7.5 and not a 7.8 - ended up filling the barrel down myself to get the correct diameter however that just the first problem with this tool, the collar doesn't tighten enough so you loose your pin night setting ..... My question is has anyone use the black southord lock picks? I'm after a 7 pin but can't seem to find out what diameter they are supplied in, has anyone any experience with this pick (found on Amazon at £29.99)

Many thanks in advance
 

LAZORIAN

Active member
vacBacker
Feedback
2 (100%)
Credits
260CR
I think most people on here use one of these...

drill.jpg
 
Only 5 mins after posting this my crappy goso has cracked the lock! And luckily there's a full set of keys within! Still thinking about a southord as iv got a few more to crack - and I'm afraid guys if I got the drill out I would have been needing to buy some new locks ;)
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
wiltshirewoodcraft said:
I'm afraid guys if I got the drill out I would have been needing to buy some new locks ;)

That's the point. We're saying since most of the people on here are collectors and we're not operating these things, therefore we don't need to care if they lock or not, most people just drill the lock out and replace it. I prefer not to but I have done on occasion. Twice now on my Gorf as I keep losing the damn keys
smiley36.gif
 

pulstar

Active member
Feedback
41 (100%)
Credits
459CR
Southord are probably the best brand of pick I ever used. Never a problem with those tools. Never needed a tubular pick before though so can't really comment on those, but for regulars there are the best.
 
Top