Logic Analyser (Again!)

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
The problem with a logic probe is that it only tells you if you've got activity in the right places. It can't tell you if it's the right activity at the right times. A bunch of other kit can tell you all of that, a logic analyser, a signature analyser, Fluke and so on.
 

andyman

always pull away from your face
Credits
1,059CR
I'm in between activity and right activity at the moment, have an analyser and have a very rough idea what it displays, any chance you could continue this thread when you're new toys appear Martin
smiley1.gif
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Yes and no! Of course I'll go into the analyser and the scope and what I think of them, but I can't really go into what I'm doing with the analyser at the moment
smiley2.gif
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,009CR
Guddler - yes, you are right - logic probe & fluke usually used together.

I've had boards where a scope would be handy, but I can only think of one where a logic analyser would have helped me find the problem quicker. (although I guess it would help on the slap fight I have where the two CPU's interfere with each other!)

Andyman - whatever you use you need to know what 'right activity' is likely to look like, that's where schematics and experience kick in. (and why it's harder to fix a board for which schematics are not available)
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
Andy - what LA have you got? I learnt on a Rohde & Schwarz I bought from Macro which is a proper 80s vintage job, but I've also got an Intronix 34 channel USB so if you want a refresher let me know what you're running and I'll show you some tricks - sniffing the CPU bus to see what code is executing, comparing to a Mame debug cap to ensure proper activity and the obvious stuff like ensuring a decoder/shifter/counter is working.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Absolutely! Though I have to say, just recently, I've had quite a few instances where the logic probe (attached to the Fluke - I never use a separate one) was telling me things were flashing away just fine but when I checked with the scope I could see the signal was being dragged down to a marginal level by something.

Everything that I'm doing here can be done with existing older kit, and I'll be honest, probably easier - but that's not my main driving force though. I desperately need to reduce a) the number of different things I have plugged in and b) the amount of bench space they take up as roughly half of my bench is now taken up by helicopters and planes.

And if in the process I get kit that can be used for other more modern things rather than just arcade boards then all well and good
smiley2.gif
 

andyman

always pull away from your face
Credits
1,059CR
Obviously, I understand the second part, wouldn't ask you to jeopardise
ongoing stuff. Just stick it on a gameboard or something and say this
is, that is....

Tim, its a Thandar TA2160 20Mhz, close looking to this, bigger box with a smaller screen (can't find a pic on Google)

picture_202_ef561.jpg
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
This is... a RAM !

This is... a ROM !

smiley36.gif
smiley36.gif


And let's not forget the CPU
smiley2.gif


(Sorry!)

[EDIT] In a good mood as I'm all packed up and ready to go to my first 'Heli Fly-In' tomorrow
smiley20.gif


guddler2012-08-31 23:31:36
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
PS: That's a big bugger! Though not as big as the R&S that Tim has (since I once borrowed it and it was so big I didn't have the room and gave it back)
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
K. That pic looks amazingly like my Rohde & Schwarz LAC64, ex Macro :) If you go to FTP://ttl.arcadetech.org (it's the new FTP site for flippers.com, hosted by ukvac :) you'll find a Rohde directory with a pretty decent manual. With some luck there will be some similarity if you fancy browsing, but welcome to pop over with it and I can try to make edumacated guesses.
 

andyman

always pull away from your face
Credits
1,059CR
smiley36.gif
Think I've passed that stage in secondary school although I did label a Benson & Hedges packet (albeit a very small one) as the actual chip in a processor package for my first year project, stupid tobacco advertising in the 80's.

Heli Fly-in, sounds interesting, have fun
 

andyman

always pull away from your face
Credits
1,059CR
Haha, vintage LA same as vintage cabs, go out to make a coffee, smell burning, come back in to find smoke pouring from the side vents
smiley36.gif
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
LA turned up this morning by the way. That's what you call awesome service! Been out all day though, may unpack it and have a look tomorrow if I get time. Packaging looks quality thou
smiley36.gif
 
Top