Monitor degaussing problem

hendrix77

Newbie
Credits
5CR
Hi I've just recently got hold of jamma cabinet and want to use both horizontal and vertical games on it. I've put the monitor in vert mode and I'm getting purple blobs. I know it's a degaussing problem so I left it over night and it still is giving same picture ?? I've noticed on the back of the tube the coil is slightly shorter and this is the side I'm getting the problems. Is there a fix for this ? I've seen degaussing tools but I can't find any in uk at all. Cheers
image.jpeg
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
In a pinch you can try to degauss it using a strong magnetic source. Over the years I've used a drill (running), a speaker and a degaussing wand with various levels of success. The latter is the best but they are increasingly harder to find. Maplin used to sell something named like "strong magnet" which I've used once or twice.

To fix it properly you're probably going to have to fix the degausing circuit on the monitor. You've likely got something large and ferrous in or around your cab that will be affecting it whenever you rotate it (like an RSJ). This is generally one of the reasons why most people just end up with at least 2 Jamma cabs, rotating the monitor is never easy, you're risking the monitor each time unless you've got muscles like Popeye, often has issues like this and just is a general pain in the backside.

Cheers,

Dan
 

geordiemick

Newbie
Credits
14CR
I have this if your really stuck i have this ? Ive never even tryed it , it needs a plug on , and its old but im sure it will still work as its only an electro magnet.
IMG_0192.JPG
 

joe34

Active member
Credits
448CR
maybe it's a case of he just needs to reposition the coil he already has at the back of the tube so that it is degaussing the corners properly (or, could replace the coil if it's too small, people on this forum will have spares)
 

hendrix77

Newbie
Credits
5CR
Hi sorry been out walking my dogs. Yes the coil cuts the corners off on the bottom of the tube. I was kind off thinking I could pull it out reposition it so it goes all the way round. But the monitor is in such good nick I don't want to screw it up with me mucking about ?? I think I'm going to leave it in horizontal position and play vert games like this for a while. And in future get another jamma cab. Like you say I'll risk keep moving the monitor and knowing my luck I'll blow myself up. It does scare me every time I rotate it lol but thanx for all the advice and replies. Also one last question how do vector games look on a raster monitor ? I've had mame with hlsl and lcd screen before. And I'm waiting for my jpac to turn up before I can play lol
 

hendrix77

Newbie
Credits
5CR
Yes I agree with you. I guess they were designed to be rotated but not constantly. And I think this cab has allways been in this position. So I'm going to respect it and keep it the way nature intended ??
 
Top