Mr Do Crystals

Syrup2407

Active member
vacBacker
Feedback
5 (100%)
Credits
163CR
Hi All,

I have been repairing a faulty Mr Do PCB and after the initial visual inspection I have found two EPROMS in upside down, two scratches breaking tracks, a missing transistor and quite a bit of corrosion on a couple of the devices.

The two major victims of the corrosion are the two system crystals which are 8.2MHz and 19.6MHz. I have done a search on the web and the usual suspects of RS, Farnell, Digkey etc. are not being a lot of help.

Would anyone have any suggestions of other vendors I could try for these parts?

Cheers,

Gav
 

Thwocker

User
Feedback
3 (100%)
Credits
23CR
I thought you had discovered a previously unknown title in the Mr.Do! series. "Mr.Do! Crystals"!
smiley2.gif


Cheers,

Marco
 

Syrup2407

Active member
vacBacker
Feedback
5 (100%)
Credits
163CR
Unfortunately not an undiscovered 'Do' game. Just one with some very rusty crystals with broken legs. I will put up a pic later (the amount of corrosion is quite frightening!).

If I can get some replacements then I should be able to get the board up and running.

Cheers,

Gav
 

obcd

Active member
Credits
3,830CR
Some years ago, I know you could order a crystal for a specific frequency. It was expensive and you also needed to know the circuit it was going to be used in, as it's capacitance was important.

There also exist programmable clock generator ic's. They use one xtal as base and produce multiple output frequencies. If you don't intend to keep everything original, it's an approach you could consider.
 

Syrup2407

Active member
vacBacker
Feedback
5 (100%)
Credits
163CR
Hi Obdc,

Thanks for the info on the programmable oscillator units.

I am going to find out the costs of getting custom crystals made, it seems that one-offs are not out of the question.

Will let you know what I find out.

Cheers,

Gav
 

Syrup2407

Active member
vacBacker
Feedback
5 (100%)
Credits
163CR
Hi all,

I have found a company that will make the crystals here:

http://www.quartslab.com/

Not cheap at £12 each but could be an option if anyone else is in a fix for a crystal.

Cheers,

Gav
 

Syrup2407

Active member
vacBacker
Feedback
5 (100%)
Credits
163CR
Hi guys,

An update (its been a while) on the Mr Do replacement crystals.

I ordered both crystals from a company called Quartslab (ended up as £15 each) and these arrived last week. I replaced the muldy / corroded / broken crystals on the board and hey presto we have clocks again and the board booted to the title screen.
smiley4.gif


Blue was missing on the monitor and this was due to a missing transistor, duly fitted a new one and blue returned.

There were also a couple of dodgy sprites that I tracked down to a couple of corrupt EEPROMS so that we easily cured with a couple of reprogrammed parts.

The sound is also not working and one half of the pre-amp was faulty, I need to order a replacement chip but once I have that the board should be up and running again.

It is good to know that a board that even has considerable corrosion on it can be repaired, it was not the cheapest fix by any stretch of the imagination but if anyone does need a crystal I can highly recommend who made the whole process incredibly easy. Please let me know if anyone would like the company details.

Cheers,

Gav
 
Top