Ms Pac-Man: Pink colour code?

smeghead

User
vacBacker
Credits
20CR
Howdy,

Right, it's Sunday, and I figured it's worth a trip to B&Q to find a colour match to the Pink on my Ms Pac-Man cab.

Before I go, does anyone know the precise colour code/pantone code for the Pink? I've googled it, but it's just a bunch of American depot stores that seem to be suggested.

I bet there are 100's of types of paint too, Gloss, Satin, Matte etc etc... which one do you think? Satin?

Other than that, I'll just take the Marquee to B&Q and ask them to colour match the pink bit.

Shame there isn't any original pink left on the cab itself for a proper match

$_1_1.JPG
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Yeah, colour matching can be a problem sometimes, i heard the colours used on most early machines are off the pantone colour chart as thats what the printing press houses of the time used.

Definitely not gloss, i can never quite tell the difference between satin and matte but satin sounds more appropriate as it would be more vibrant.

You need Al (PAC-MAN) or someone similar to spot the post as he's a master restorer IMO.
 

ZedEx48K

8-Bit
Feedback
2 (100%)
Credits
1,423CR
RGP said:
i can never quite tell the difference between satin and matte but satin sounds more appropriate as it would be more vibrant.

Here's a rough paint guide

Matt = no shine, thin fast drying paint
Satin = a little shine, thin fast drying paint
Gloss = well glossy, gloopy and takes a decade to dry.
 
G

Guests

Guest
Thanks James ^

AJ, if you have van or a mate with a van take the cab to a paint shop and get it matched professionally. It will be impossible to match an off the shelf colour with the pink required and there is a chance the pink could well be faded. T-cut a part of the pink that is the most vibrant and get them to match that part. As James said it wont be gloss but they will match the sheen also so you will get the correct finish which is paramount as if you mess with a pink that has the wrong sheen it will stand out like a sore thumb. The other problem is, if you only touch in the pink there's a good chance the rest will look shabby....always a tricky job to touch up without a major balls up.

I do like these cabs though, nice purchase sir!

Good luck and keep us posted.

Al
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Seriously is this really worth doing? The faded pink doesn't look that bad and it is still all original. Do you really want to risk painting it? Personally any cab I saw that had been hand painted would half in value but that's just me.

Dan
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Cheers for joining in Al, thats why on those TNT amusements videos they do all the colours instead of just one.

I keep saying to people there was no black magic voodoo about how arcade cabs were built and finished back then. They used what was available at the cheapest price possible.

Today its difficult to find the info but not impossible to get a match.

Everything is much more proprietary these days..
 
G

Guests

Guest
Absolutely James, if it was mine and it needed the pink doing then there's no doubt the rest would be done.

Matching the colour is the easy bit.
 

smeghead

User
vacBacker
Credits
20CR
DanP said:
Seriously is this really worth doing? The faded pink doesn't look that bad and it is still all original. Do you really want to risk painting it? Personally any cab I saw that had been hand painted would half in value but that's just me.

Dan

It's a 50/50 whether to do it or not. I'm pretty good at painting this sort of style on canvas using acrylics and figured that as this cab is already a hand-painted original using a similar style, that I could probably bring it back to life. Obviously the pink will stand out like a sore thumb... my plan was to let it dry, and then use some really fine sand paper to give the Pink an aged look to match the blue and yellow.

But yeah, it doesn't look too bad where the Pink is now white :)

$_1.JPG


http://www.ukvac.com/forum/my-2nd-dedicated-cab-has-arrived_topic339280.html
 

smeghead

User
vacBacker
Credits
20CR
haha.... £1200
smiley2.gif


by the way... I went to B&Q for a colour match to the pink. They gave me a free tester pot. There's waaaay more than enough to do the whole cab! :)
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Haha, i can see you've played pimp my arcade before :) i know inflation is a bui steep right now but i'm only blind in one eye.

I'm just saying its easy to overlook how nice an MS cab actually is. All the namco/midway cabs were iconic.

Nah, i'd buy a wreck and do it up. Its nice getting a worker but in a lot of ways there's so much satisfaction in nursing one back to life electronically and then cosmetically.

I'd love to see how the original stenciling process was done,
 

Dex-Jay

Active member
Feedback
4 (100%)
Credits
375CR
Were it mine I would -

1 Get the stencils.

2 Make sure that the pink you mix (get mixed) isn't as fresh as the original factory pink. A sympathetic restore in a pink that isn't as vibrant as when it was new. The pink will stand out like a sore thumb against the other faded blue otherwise. The whitey/bleached pink I couldn't live with but neither could I fresh factory pink.

Get the right pink you're happy with before you even start. Satin enamel or 2K and spray it with stencils, brushed or brushed and sanded will look like it and be a right faff!

Take your time dude!

Rich
smiley2.gif
 

smeghead

User
vacBacker
Credits
20CR
Thanks for the advice :)

I only bought the cab yesterday. Think I need to let it settle in my living room for a week or two before I actually do commit to repainting, or just leaving it as it is.

I think I want to replace the monitor though as compared to my Donkey Kong, the screen has a lot of burn to it, and the image it creates is quite blurry... even if I twiddle the Focus on the back of the monitor.
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
If you're ok with a soldering iron i can give you a couple of places to look on the monitor to probably solve the focus problem as i've seen it a few times but as I and everyone else will say, monitors are not to be handled without respect.
 
Top