Nsm jukebox help

Body pop

Active member
vacBacker
Feedback
24 (100%)
Credits
1,266CR
Can anyone here help me with this ?
It's a nsm old fashioned wizard cd wall box
It was working ok ,then started making crackling noises
Now the sound is very low and crackly ,even when turned up to max
The free credit button on remote also stopped working
I had the speakers just wired to connectors in first pic
What sort of wires do I need to connect just to second picture
And Woud this possibly solve the problem .ive checked fuses and swapped the board is first pic over with another any ideas on how to solve this thanks
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Are the red LEDs lit on each side of the amp board? If speakers are miss matched the amp will shut down to protect it which could cause sound to be distorted and low. The speaker terminals are the 2 outer screws centre screw is empty not used.

Ronnie
 

Body pop

Active member
vacBacker
Feedback
24 (100%)
Credits
1,266CR
Thanks for that .that does sound like what has happened
Hopefully .
Is the amp the board in the first pic with fan etc ?
Is there a way of starting them up again if they shut down ?
I'll get a look and see if leds are on soon
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Yes the amp board with the fan, sometimes the fuses can blow but decent speakers 4 or 8 ohm or try one soeaker at a time see which side is the issue
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Well if both channels are distorted I would think issue is before the amp or both speakers are duff, check when it's working if the LEDs go out while its playing with the speakers
 

Body pop

Active member
vacBacker
Feedback
24 (100%)
Credits
1,266CR
Just got looking at this again last night
I tried another speaker in both ports
It's still the same ,really low and crackly bass
Before this had happened I had been in the setting and turned up bass
Both lights stay on when speakers connected
Is there anything else I can check ?
Thanks Glenn
 
Top