Operation Bear - Op Wolf clone

paulcan69

Can reburn OTP EPROMs! Fear my power!
Feedback
11 (100%)
Credits
943CR
Yep you got it...most sh*tty pcb I've had the pleasure to have dealt with.

All my other Taito stuff of that era has been rock solid...?

I have one with lines through the character sprites (poss ram?) and no shots register on screen oh and no sound at all.

3 dead white screen (all sound boards on all 3 sets have no sound at all)

1 works but sound crackles on digitised speech, gun registers on screen

1 works but has missing sound fx (not speech but certain sounds) and also gun shots do not register.

Maybe 1 or 2 more with a variety of the faults above....getting sick of them now!

The 3 faults I have seen and "read about" with these pcb's.

(You see lots of faulty ones on KLOV)

No shots registered on screen....Joel (Retrorepair) on here did fix 2 of them for that fault...at some point so he can tell you what went wrong there.

Every soundboard I've ever had at some point loses either sound fx, speech or all sound altogether.

Joel fixed one with no sound at all which was a dead op amp.

Phil/Irongiant fixed another for Si (Unit504) which was some 74 series chips and a sound rom which had the speech effects on it...again he would know more.

The other Joel has at the mo for the "missing sounds" so keep ya posted.

Or they are just dead white screen....which I've read is some main ram on the bottom board, but not tried to have those ones fixed yet so? Could be internet "talk"

I have really lost it with these pcb's and I'm scared to run this game for any length of time due to fear of the next pcb death...this must be what Daytona owners feel like.
smiley36.gif
smiley2.gif

paulcan692012-12-28 21:30:26
 

Bods

Senior Member
vacBacker
Feedback
5 (100%)
Credits
5,410CR
My Op Wolf pcb failed as soon as it was delivered, or it was faulty before

I got another one off ebay 6 months later, was from arcade warehouse as well and it worked ok for quite a few years

Then the sound started playing up, I have some other boards and they all seem to be faulty too, so I have about 4 non workers too
smiley36.gif
 

Bods

Senior Member
vacBacker
Feedback
5 (100%)
Credits
5,410CR
Well today I have been checking over the Electrocoin Cab I bought, It's originaly a Crossbow and I was going to restore as that, but I can't due to lack of parts and the Crossbow that was taken from the machine in Scotland is badly damaged and has parts missing too

So today I powered it up and it's working as far as the demo mode and sure enough as per the sheet of paper in the bottom, it has an Operation Wolf pcb in it

Also has the pinouts on the sheet and it's a bootleg as pictured above on the right side. So I can help you with connecting your Op Bear up hopefully Paul
smiley1.gif


Got any pics of your PCB dude
 

paulcan69

Can reburn OTP EPROMs! Fear my power!
Feedback
11 (100%)
Credits
943CR
You legend Bods, cool thanks!!!

Pics of my 2 actual boards are in this thread Jessybr posted them
(I got them from him)

Love to get them running
 
Top