Operation Wolf - few issues

neoretro

Active member
Feedback
11 (100%)
Credits
1,121CR
Hi All,

Picked up an Op Wolf on here a few months back and just got round to looking at it.

Got a few issues which I haven’t been able to source, two of which would love some help with to start.

1. Parts of the sound isn’t right. You get music but some of the sound effects are missing. So the shooting sound effect and the voice saying Operation Wolf at the start. I’ve got a spare board but it looks pretty beaten up. But may be able to source some parts off of it.

2. The monitor, no matter what way round it’s mounted or what plug the yoke is connected to, the screen is either upside down with the text the correct way or the right way round vertically but with the text the wrong way round???

There’s other issues with the gun recoil but I’ll detail those if I can’t fix them after opening up.

Cheers

Dave
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Some good topics online,but ideally u need the logic probe/oscilloscope out and the schematics.otherwise ur just swapping chips for fun. And I've just repaired mine,and the lower board is pretty hard to pull chips out complete.
Ur gonna need to make a loom for the bench too.usually the sh*ttiest pcb works better.
forcefulfil2022-02-26 17:18:16
 

neoretro

Active member
Feedback
11 (100%)
Credits
1,121CR
forcefulfil said:
Some good topics online,but ideally u need the logic probe/oscilloscope out and the schematics.otherwise ur just swapping chips for fun. And I've just repaired mine,and the lower board is pretty hard to pull chips out complete.
Ur gonna need to make a loom for the bench too.usually the sh*ttiest pcb works better.

Haven’t got either of those so I’m f**ked
 
Top