Operation wolf Gun sensor

[Unit504]

I am looking at replacing or if possible fixing the gun sensor part as pictured below..
as the gun has stopped registering the shots on screen...

it this a part that can be tested or is a new one needed..?

i have tried with turning the monitor brightness up and down to see if that made a difference,

but it does not

 

[paulcan69]

Dude noooooooooo! Not the op wolf!!

First check voltage going in, have you got another PSU from a jamma cabinet spare?

Def worth a go, maybe a PSU issue.

Also someone on J+ has posted a link to a op wolf repair but I couldn't get the page to load.

Check it, if so post the link here for ref.

Ta.

 

[Unit504]

i know i couldnt believe it

yes i see the link was reading over it today.. so i guess a little bit of testing is in order this weekend

Dude noooooooooo! Not the op wolf!!

First check voltage going in, have you got another PSU from a jamma cabinet spare?

Def worth a go, maybe a PSU issue.

Also someone on J+ has posted a link to a op wolf repair but I couldn't get the page to load.

Check it, if so post the link here for ref.

Ta.

 

[Unit504]

looked at the outputs and they look good, came back later this afternoon and the psu had died wtf!!
so ill have to source a psu as ive none here

so anyways i thought as ive the time ill check all the wires and connection on the pcb/power tray,

get rid of the nasty old dust!