philips videopac

bobsyouruncle

Newbie
Credits
14CR
Hi sorry if not in the right section but you guys seem to know your stuff gaming wise. I acquired a Philips videopac console on eBay and everytime I plug it in its tripping the electrics. Is it worth repairing? Is it something simple? Or should I just sling it?

Thanks in advance guys
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,009CR
never fixed one, but hopefully the PSU is seperate from the rest, and it sounds very much like that is where the fault is.

certainly worth checking for shorted diodes in the rectifier, dried out caps / blown varistors - that sort of thing.

look on the bright side, you can't make it worse ...
 

bobsyouruncle

Newbie
Credits
14CR
With these things you can't disconnect the controllers, av or power lead unless opening it up. It's probably one of the ugliest consoles I've seen. It's like a giant speak and spell. I'll open it up and post a pic.
smiley5.gif
 

bobsyouruncle

Newbie
Credits
14CR
Think ive found the problem I have a working videopac and the plug is attached onto a pack, the console ive just received has a wire going straight into the console no pack. Looks like a DIY derek job.
 

bobsyouruncle

Newbie
Credits
14CR
videopac.jpg
videopac1.jpg


Here it is folks! the D.I.Y is on the left. No wonder it was tripping I just plugged it in presuming it would work.
bobsyouruncle2013-09-08 18:10:40
 
Top