Playchoice 10 zapper adapter fitting

[Body pop]

Has anyone had any experience of fitting this nes zapper adapter to the kind of play choice in pic
Could you point me In The direction of where it’s fitted ?
Or indeed can it be used .
Any help greatly appreciated as always .thanks

 

[jerryspaghetti]

Hey, the red and white sockets for the gun should be on the 36-pin harness which goes to the control panel. If it's not then you may need to make up a loom and connect to the harness yourself.

Check and see what PCB you have. Some have 2 edge connectors (36 and 44 pin) and others have 44 pin and a black socket.jerryspaghetti2022-11-02 14:32:04

 

[Body pop]

Hey, the red and white sockets for the gun should be on the 36-pin harness which goes to the control panel. If it's not then you may need to make up a loom and connect to the harness yourself.

Check and see what PCB you have. Some have 2 edge connectors (36 and 44 pin) and others have 44 pin and a black socket.

Thanks Jerry
Here’s some pics .would it be either of those sets of

 

[Amb47uk]

When you figure it out, I think unfortunately you are going to be disappointed, the way the zapper works means you cant quick fire (or hits dont register). Atleast that was my finding.

Should have been made clear by the guy selling this.

 

[jerryspaghetti]

Hard to tell from pics but is there a black locking connector with a 20 pin (2x10) harness coming off the board?

If so trace that harness to see where it goes to.

See what is coming off pins 14 to 20. Those should be the gun specific wires.

jerryspaghetti2022-11-02 15:34:57

 

[mysticmonk]

Regarding the trigger shot delay, have a look here for a solution.

nes zapper on playchoice mod

If I remember correctly, removing some capacitors on a vs pcb increases the sensitivity for guns, might be similar to a pc10 pcb.

Neither are answering your question but it's good to know ahead.

 

[Body pop]

Great info guys ,many thanks for taking the time to reply and help
I’ll get a look at it later again hopefully

 

[antray84]

I had one of these I am yet to use it.

But funny story. I actually ordered a proper arcade nintendo gun off a guy in America on Ebay. It got to the distribution centre and they destroyed the package as they thought it was a real gun. Gave me a refund and the seller lost his item.

 

[Body pop]

I had one of these I am yet to use it.?

But funny story. I actually ordered a proper arcade nintendo gun off a guy in America on Ebay. It got to the distribution centre and they destroyed the package as they thought it was a real gun. Gave me a refund and the seller lost his item. 

Funny story lol
Is it hard to find a proper one ? How much do they go for

Anyway I had a quick look and I have the black 20 pin connector but haven’t got any further yet

 

[Body pop]

 

[Body pop]

When you figure it out, I think unfortunately you are going to be disappointed, the way the zapper works means you cant quick fire (or hits dont register). Atleast that was my finding.

Should have been made clear by the guy selling this.

I managed to miss this ,are the games unplayable with it ?
Or just rubbish lol