Programming Coin Mechs

Paul_in_nottingham

Active member
vacBacker
Feedback
1 (100%)
Credits
160CR
So further to today's news of the new pound coin, it got me thinking...

I've never seen a thread coving off how to program a coin mech for new coins.

How is it done?

What special equipment is needed? I've noticed some of my mechs have what looks like a phone socket on - I'm guessing that's something todo with connecting them to a programmer?

Has anyone made a hack to use a PC / RPi / Audrino to program coin mechs?

Is this something a home user can do?

Looks like there might be extra beer tokens to be made from the collecting community if someone can offer this as a service..
 

jengineer

Senior Member
vacBacker
Feedback
49 (100%)
Credits
1,205CR
something like this below will program any Mars mechanism to accept any coin, but stupidly I have mis-placed the lead which goes from the machine to the mech, at the time my father bought this there was a more expensive one which did both Mars and Sentinals but we could get Sentinals re-calibrated from a guy in Royton for a fiver each so we just bought this, I must try and find the lead for it

 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I have one of them
smiley1.gif
First time I've ever seen another.

The down side to them is that every time you reprogram a mech you need to burn a new PROM. 82S129 or 82S126 from memory, and they don't exactly grow on trees these days. I do seem to remember you can use each prom twice however by clipping a leg and turning it round? Something like that anyway.

I didn't know it did any Mars mech. I thought it was just a select few ME-110 / 111 springs to mind. Interesting to know if it does more and how.

When I first got it I couldn't work out how to use it so I phoned up the number on the front of it. Some old dear went and got her husband who'd clearly retired but he was really helpful and talked me through it. Can't beat service like that
smiley36.gif
That was over 10 years ago mind before anyone considers ringing again!
 

simonden

Active member
vacBacker
Feedback
20 (100%)
Credits
1,042CR
Do you mean the 10 pin ribbon cable? That looks exactly like the lead that you sold me a while ago (now gone). but should be easy to get hold of a replacement.
 

EuroGaming

Newbie
Credits
9CR
Hello

I am randy from the netherlands

I have a Mars Coin programmer for sale.

If anyone is interested in this programmer you can mail me. EuroGaming@Live.Nl

Suzo_Mars_Programmer.jpg
 

obcd

Active member
Credits
3,830CR
Some coin mechs can be reprogrammed using a simple RS232 - TTL converter and the correct software. Some even have a learn dipswitch that can be used to learn tokens (new coins) to the coin acceptor.
 

obcd

Active member
Credits
3,830CR
The older nri G13, Seci RM3 and RM4 and most Alberici 3.5 inch models can be programmed with just a converter and the correct software. Some of those however are having problems with the detection of dual metal coins like the 1 and 2 euro coins. I have no idea if the new pound will be like that or not. The alberici software is freely available on their website. The nri software is something that probably is floating around on the net.
 

EuroGaming

Newbie
Credits
9CR
This programmer is only for Mars Electronics Ms & Me.

The problem in old nri g13 whit the 1 and 2 euro comes the dual metal. I have no idea of

the new pond coins have the same problem. The problem is only whit dual metal coins.
 

obcd

Active member
Credits
3,830CR
nri g13 was actually the only one we could use reliable with the 1 and 2 euro coins. They have a small problem with their anti strimming circuit. If a piece isn't leaving the bottom of the acceptor fast enough, the acceptor is not giving a coin pulse for it. Such can occasionally happen if the hole below the acceptor is to small and the coin is bouncing on the edge of it.

The seci rm3 was a disaster. Alberici changed it's model several times after the euro came out, and sometimes refused a valid coin.
 
Top