Rgb resolutions

Markitanis

Active member
Feedback
2 (100%)
Credits
80CR
Hi just wanted to know the different analogue rgb resolutions there are?
Im connecting my mame pc thru a dvi to rgb converter and want to know if the resolution it outputs is compatible with my sony pvm monitor using rgb. My monitors resolution is 15 khz
 

Battlezone

Active member
Feedback
1 (100%)
Credits
410CR
I'm not 100% sure I've understood the concern but I'll have a go at the question.

There are loads of slightly different screen resolutions for the games

in Mame. Arcade resolutions fall loosely into 4 categories (low, medium, high, vector).

Your 15KHz RGB monitor should be good for most/all the low resolution (CGA)

games provided your converter outputs CGA frequencies.
 

Markitanis

Active member
Feedback
2 (100%)
Credits
80CR
Im going to be using the dvi port on the computer to possibly this dvi to rgb converter (link below) and wanted to know if this would work?? And how well it would works
Link is below
http://m.ebay.co.uk/itm/Extron-DVI-RGB-100-DVI-to-RGB-video-converter-/161877209714?nav=WATCHING_ACTIVE
 

Hurray Banana

Moderator
Staff member
vacBacker
Feedback
8 (100%)
Credits
2,755CR
These are resolutions I've used from a pc using quickres. That generated useable 15khz video using the right hardware and software solutions (sailorsats video driver)

IMG_20160613_170924.jpg
 

Battlezone

Active member
Feedback
1 (100%)
Credits
410CR
Markitanis said:
Im going to be using the dvi port on the computer to possibly this dvi to rgb converter (link below) and wanted to know if this would work?? And how well it would works
Link is below
http://m.ebay.co.uk/itm/Extron-DVI-RGB-100-DVI-to-RGB-video-converter-/161877209714?nav=WATCHING_ACTIVE

I've no idea about the DVI to RGB you listed.

One other thought on PC-Mame to RGB monitor is that I've heard several people recommending GroovyMame with an old graphics card, so you may consider looking into that rather than going the DVI route.
 
Top