Robotron boards

JohnBud

There's only one JB, only one JB!
Feedback
2 (100%)
Credits
429CR
do you have the loom for the coin mech ??? ive got a few spare but i dont know if they will do the trick. if you want a rummage, get a train from wemyss to croy. i can pick you up at the station. i think there are a few differences in the cabs, mine is the american job its got a wells g monitor. i did have spares kicking about. but im in the process of losing a few, so its pretty cramped just now.

cheers.

john bud
 

R177

Newbie
Credits
11CR
Andy & John, thanks for the replies. I'm going to buy S10 £1 and 10p mechs, probably from the ebay seller you mentioned Andy. I think the coin entry buttons I can pick up from here > http://www.coin.demon.co.uk/-coin.htm#S10.

John, thanks for the offer, I won't be able to get down to the Ayrshire area until mid October, I'll PM you on here when I know for sure, any spares I can get my hands on for my Robotron would be most helpful.
smiley20.gif
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
You should use Ordyne on this forum to service your Hantarex monitor chassis - you can just send him it and he'll sort it for around £35 + any unexpected parts (or thereabouts).
 

R177

Newbie
Credits
11CR
Thanks for the info about Ordyne, I've had a look at his website and I'll keep it in mind when I can afford to do something about the monitor.

Still on the hunt for Wico joysticks.
smiley1.gif
 
Top