scramble pcb

sukhbir

Active member
Feedback
46 (100%)
Credits
1,735CR
hi,folks just got my scramble pcb recently from a ebay win.the seller stated that is untested,here is the pcb out of its box.
WP_20170630_001.jpg

bit of a state,no pcb spacers and no legs on the board.i powered up the pcb and amazingly the game ran but with bad colour and graphics.
WP_20170630_006.jpg

sound was working,controls were ok.i suspected a bad rom ,i did a romident on all the eproms and found one rom on location 5f bad.as this pcb is over 36 years old and its one of my favourite old classis i decided to give the pcb a service.first job i did was to clean the pcbs with roms removed.erased all roms and found 6 failed the verify check these roms are 2716 type.i had a tube of nos tms2516 so i used these.
WP_20170704_001.jpg

right all roms programmed and also new elctrolytic capcitors fitted.
WP_20170704_002.jpg

powered the board and all is well,soak tested for many hours and worked a treat.
WP_20170701_003.jpg
WP_20170704_004.jpg
 
Top