sega mega tech help

2ombieboy

Newbie
Credits
13CR
Hi guys got a mega tech cab/board and powers up has 8 games in but nothing shows up. took the main board out there are small green wires on the solder side are they meant to be there its a rev a main board. allso if any one knows how to fix so the games show up that would allso be super.

Alan
 

2ombieboy

Newbie
Credits
13CR
IMG_1073_zpsa8d38849.jpg


Working fine just wont show the games
 

stevebm1

Active member
Feedback
39 (100%)
Credits
1,269CR
could be your games are inserted the wrong way round,the notch needs to be facing the front.if that's not it,try unplugging all the games,then only plug one in,and see if that shows up,if it does,they work your way through the carts,to find the faulty one,I had that screen once with mine,and it was down to a dirty cart edge connector
 

glstar

Active member
Feedback
11 (100%)
Credits
160CR
I just received another megatech board.
But now i have problems with the up monitor...
All is working fine but not the up monitor.
This is what i get:
m7zax.jpg

View My Video
and it's not monitor problems since with my old broken megatech board i can display on the up monitor just fine:
10f5i03.jpg


This newer board is working fine switching game and recognize them but not sending correct image on the up monitor....
Seems like bad signal.....

Someone knows what could cause this??
 

Nes4life

Active member
vacBacker
Feedback
12 (100%)
Credits
1,134CR
Seems like a logic problem to my uneducated eyes. There's a test mode you can put the mega tech into to test roms etc.

But all this aside, it seems to me that someone could make some good cash if they would put their mind to creating a repair service for these non-Jamma boards. You have 2 faulty ones and so do I, and I've heard other people who own three broken ones. Maybe we can pool our plight and get a bulk job sorted?
Failing that... Are you within travelling distance of Cambridge as I'll be looking at holding a tutorial repair event sometime in the future.
 

glstar

Active member
Feedback
11 (100%)
Credits
160CR
Nes4life said:
Seems like a logic problem to my uneducated eyes. There's a test mode you can put the mega tech into to test roms etc.

But all this aside, it seems to me that someone could make some good cash if they would put their mind to creating a repair service for these non-Jamma boards. You have 2 faulty ones and so do I, and I've heard other people who own three broken ones. Maybe we can pool our plight and get a bulk job sorted?
Failing that... Are you within travelling distance of Cambridge as I'll be looking at holding a tutorial repair event sometime in the future.

Thank you for your suggestions....

I already contact Mark at retroclinic and he told me this could be a sync problem coming from the board itself.

He cannot look at it...
smiley19.gif


So now I don't know how to fix this....

Oh well....

It could be just good to have someone able to repair those sega boards....

Regarding the travel, well, i'm in Italy (Rome).....

smiley1.gif
 
Top