Sega Model 3, SR2 plug n play PC project

[Kev A]

Hello Kev,
thanks for the reply, yes I have full range left and right, it seems the pot is ok.
I have another drive board but this one gives er02 right away when turn on, it would be great when you have time to confirm the start operation of the driver board, if not asking to much a video would be super!
I also tried with a second wheel from the other cab of sr2 twin and its the same, so I assume pot and encoder from the wheel are ok (I am not sure if the encoder plays a role here).

Yeah should be able to get a vid of the drive board when the cab boots..... its running the original game pcb at the mo, is that ok?

 

[sromba]

Yeah should be able to get a vid of the drive board when the cab boots..... its running the original game pcb at the mo, is that ok?

Yes its ok! I guess the original game PCB its not involved in the ffb driver boot process

 

[tb2000]

Yeah these are only for Model 3, and Model 2 versions available too, so I would say no for now, unless you swapped out Model 2/3 ffb hardware in the cabs first.

Although looking online Tibal said this last year, so possible there will be something more plug n play in the future....

View attachment 26409

Interesting stuff! Be great to get a PC based setup in the cabs if possible. Also be nice to get Chihiro's in my twin cab as I say but they're pretty expensive, I think the last price I found (some time ago now) was it would've been about £1000 to get two Outrun 2 SP Chihiro setups (possibly more with SSD)!