Sega RingEdge 2 CMOS error

tronbaby

Active member
Feedback
8 (100%)
Credits
62CR
Hi everyone,
I tried booting up my Lindy with a RingEdge 2 multi in it and I’m getting this error…

CMOS Settings Wrong
CMOS Date/Time Not Set
Input Bios Setup Key

Any ideas? Is it something simple like a dead cell battery on the motherboard?

Thanks
 

tronbaby

Active member
Feedback
8 (100%)
Credits
62CR
I can report back that the battery swap worked.
For reference, I did have to also change the jumper on the mother board after I changed the battery (thanks to Zerosum for the info), reboot and then out the jumper back to original position.
I read that this procedure is in the RingEdge owner manual too when the battery is changed.
 

chris2922

Active member
Feedback
1 (100%)
Credits
333CR
Was hoping someone else would ask this so I didn’t have to look like a noob; but I’m also impatient and fed up of waiting
smiley36.gif
So does a Ringedge multi really work in a Lindy? I thought they were different hardware specs!
 

tronbaby

Active member
Feedback
8 (100%)
Credits
62CR
It works absolutely perfectly in a Lindbergh mate.
In fact, I’m pretty sure the RingEdge multi on all.net pras was originally on Lindbergh in the arcades.
 
Top