SI Sound Issues

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I think if I owned a Space Invaders then i'd definitely try to pick one of those up but as it's not my board I don't have one. Also when I started this the board is so minty that I took the decision not to unnecessarily desolder anything I didn't have to, and given the CPU is soldered I did this all by hand with no fluke or anything. Obviously by the time got to the sound board that all went out the window and I started socketing amps and stuff
smiley36.gif


There is a Space Invaders test ROM available that allows you to trigger all the individual sounds but I couldn't be bothered to change the strapping on the board for 2716's rather than 9316's either. I know. LAZY
smiley4.gif
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Must admit, I think I have two sets myself in the loft. Meh, i still don't like them so they can stay there. I seem to recall one of them has a 12v dead short for starters...
 

Battlezone

Active member
Feedback
1 (100%)
Credits
410CR
I'm now starting to get a feel for Gudder's frustrations fixing space invader
sound problems. Hopefully I'll get there in the end as he has done.

I fixed a missing missile fire sound and thought I was done.
However I was listening to a Pretenders album the other day and
realized with a mixture of amusement, horror and embarrassment that
I was still missing a sound (invader hit).
smiley9.gif


So I replaced a few more LM3900 chips and my invader hit sound is back,
but the death sound (base explosion or whatever) has now gone! I've
also got a loud click when the game starts (and when I die).

The fact that Midway appears to have mislabeled a couple of sounds
on the schematic has also had me looking in the wrong places.
BTW thanks Robotron for hosting all those SI docs I'd be really stuck
without them.
 
Top