Sound Pots

swisstoni

Active member
Feedback
11 (100%)
Credits
120CR
Ive got scratchy sound on an Ikari Warriors PCB its noticeable when I touch the white sound pots (photo below) does anyone know if replacements can be purchased (ive tried contact cleaner but the problem still happens). EDIT im using an Astro City and reading online its possible the board needs -5v can anyone confirm if thats the case why I may not have sound

Arcade_Sound_Pot.jpg


swisstoni2022-04-03 17:36:33
 

TheDaddy

Senior Member
vacBacker
Feedback
14 (93%)
Credits
7,230CR
Yeh you can or go to a car parts supplier and get some contact cleaner (can get it from many places but they use it on cars a lot) spay in between contacts on pot and turn back and forward vigorously. Works 90% of the time. Its just dust in contacts.

Dave.TheDaddy2022-04-03 17:39:34
 

swisstoni

Active member
Feedback
11 (100%)
Credits
120CR
Thanks just read online that this board may need -5v thats why im getting no sound. I had a similar issue with a Rastan board years ago (im using an Astro City) is there any round the problem?
 

TheDaddy

Senior Member
vacBacker
Feedback
14 (93%)
Credits
7,230CR
You said scratchy sound not no sound ?? Just spotted the bad cap as well , That needs replacing. Could not see only phone as its a tiny screen.

Dave.
TheDaddy2022-04-03 18:55:26
 

swisstoni

Active member
Feedback
11 (100%)
Credits
120CR
Thanks for the replies and your patience im a noob when it comes to the repair side of things. Heres a better photo of the cap where could I obtain a suitable replacement and what do exactly to I need to be looking for would it be 10UF 16V 1000?

cap.jpg


swisstoni2022-04-03 19:26:21
 
Top