Space Fever Glitch

JC_R4CER

Active member
vacBacker
Credits
126CR
Hey all

Had a bit of time to have a look at the B&W Space Fever I picked up late last year. The cocktail is complete and working, but displays (and plays) an odd glitch.

On any of the three game modes, when the game begins, your ship at the bottom doesn’t appear. After you move the joystick and hit the fire button, the ship appears on the left hand side, but fires from the right (offset shots):

0FBE3234-19E8-450F-99C2-055234CB94DD.jpeg


When you move the ship to the right, as it hits the half way mark, everything lines up. So the right hand side of the screen plays as it should, but as soon as you cross your ship to the left hand side, the shots are offset to the right again.

I don’t know whether it’s linked, but the aliens also appear to start too low down and come down passed the “barriers” at the bottom and kill you:

D4030F58-5BFA-433B-9BB8-A5C94296CC5F.jpeg


I’ve pulled and reseated the CPU with no change. Anyone seen this before?JonathanClayton2018-01-20 10:26:08
 

JC_R4CER

Active member
vacBacker
Credits
126CR
Ronnie Dent said:
I would pull and reseat everything and make sure all the rom legs are clean and sockets are good. Also check the voltages Nintendo are prone to psu failure. I'm no expert mind!

aeroflott said:
Wot Ronnie said!

Thanks both! My next thought was the PSU as this is what had gone in my HeliFire too! I’ll scout the web now for some Space Fever B&W schematics (found lots of colour ones)
 

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
I'd change the psu to a switcher if it were mine. You can wire everything up to a switcher without even chopping any wires.

Once those psus die, they are almost impossible to repair.

I'd also check the roms are ok, but they are not easy to check as they are ancient 2708s (or equivalent)
Also, if you have a spare 8080 cpu, swap that out to rule out the cpu is good.
 
Top