SYSTEM16 Jamma adapter help

runkthepunk

Active member
Feedback
2 (100%)
Credits
19CR
Hi guys

I have a system16 JAMMA adaptor attached to my ESWAT board and as have not played it or really looked at the board I didn't know a cable was loose (and neither did I know one of the wires was soldered directly to the board
smiley13.gif
)

ESWAT_004.JPG


As you can see one of the ground wires from the JAMMA adapter is lose at the System16 end

ESWAT_001.JPG


ESWAT_003.JPG


It looks to me like it should attach to the soldered area but I might be wrong

Can anyone point me in the right direction please?

Rob

runkthepunk2016-05-04 19:37:37
 

runkthepunk

Active member
Feedback
2 (100%)
Credits
19CR
AaronBoone said:
System 16 has GND on pins 1, 2, A and B so yeah, it needs soldering back to pins 1 and A like you suspected.

Cheers man.

Yeah it obviously looked like it need to go back there but I wanted to be sure.

Now I just need a soldering iron...
smiley9.gif
 

AaronBoone

Active member
vacBacker
Feedback
3 (100%)
Credits
165CR
Someone's selling a couple of proper System 16 adapters across the road - might be worth getting one and ditching the mass of wires. You'll still need a soldering iron tho for when something else invariably goes tits up
smiley4.gif
 
Top