John Bennett
Senior Member
[ukvac] TECH : Disco Monitors
I have a nice Disco monitor in my Return of The Jedi cab, and have noiced
something weird on the CRT PCB, on the solder side, connected to the GND CRT
pin, and on the negive pin of C777 is soldered a brown round disc with two
legs (Capacitor?) , now I can't see it mentioned in the manual.. so
basically, Should it be there???
I don't wanna take it off and cock things up.. One thing that might be
helpful is that there was a completly wrong cap on the neck board at C706 so
could this some sort of compensation for it??
HELP!
Kip
-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/1/_/5935/_/977597398/
---------------------------------------------------------------------_->
DATA Imported from archives: originally posted by Kip (kip@thedvdproject.com)
I have a nice Disco monitor in my Return of The Jedi cab, and have noiced
something weird on the CRT PCB, on the solder side, connected to the GND CRT
pin, and on the negive pin of C777 is soldered a brown round disc with two
legs (Capacitor?) , now I can't see it mentioned in the manual.. so
basically, Should it be there???
I don't wanna take it off and cock things up.. One thing that might be
helpful is that there was a completly wrong cap on the neck board at C706 so
could this some sort of compensation for it??
HELP!
Kip
-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/1/_/5935/_/977597398/
---------------------------------------------------------------------_->
DATA Imported from archives: originally posted by Kip (kip@thedvdproject.com)