Flyback2021
Active member
If it keeps passing through EBay it is a matter of time before it starts morphing back into a dedicated WEC Le Mans 😂
The Electrocoin owners thread
- Thread starter _Matt_
- Start date
If it keeps passing through EBay it is a matter of time before it starts morphing back into a dedicated WEC Le Mans 😂
Flyback2021
Active member
Had a free hour this afternoon so decided to have a better look at this. Will hopefully start to do some testing in the next few weeks. More to come ..
Also noticed the same board holder as recently posted !
Also noticed the same board holder as recently posted !
Flyback2021
Active member
Love a big 10p !
If only those coin doors could speak , looks like they have had quite a life l!
Flyback2021
Active member
Thought it deserved a new piece of stainless steel .😊
Should be able to save the original sticker by the looks of it .
Should be able to save the original sticker by the looks of it .
Evening Chaps,
Just finished wiring up my shiny new Goliath trackball panel.
All the buttons seem to work (phew!). And the Happ trackball works fine in the Groovymame UI. Where I can't get it to work, however, is in the flippin' games! Aaargh!
It's been years since I messed about with this kind of set up, wonder if it's an .ini file job?
Anyone got any tips?
Just finished wiring up my shiny new Goliath trackball panel.
All the buttons seem to work (phew!). And the Happ trackball works fine in the Groovymame UI. Where I can't get it to work, however, is in the flippin' games! Aaargh!
It's been years since I messed about with this kind of set up, wonder if it's an .ini file job?
Anyone got any tips?
Flyback2021
Active member
How did you get on with the black trim ?
Great, thanks. Looks fab! I fitted it on all three of my new panels today. Didn't realise it was filled with some of the tackiest glue I've seen in ages! Good job I measured twice and cut once!
Flyback2021
Active member
Indeed , 3m glue !
You have to work quite quickly feeding it across the lip but it is a fantastic product for control panels imo.
You have to work quite quickly feeding it across the lip but it is a fantastic product for control panels imo.
Flyback2021
Active member
Working on several things Electrocoin related things this week.
Firstly midi driver, some of the worst rust I have ever seen on a hinge, flaking away like a perfectly cooked piece of cod !
Luckily I have a spare hinge from the recent Goliath panel groups buy , so Will reduce the width slightly (from both sides ) and even the drilled holes line up with the midi !
Firstly midi driver, some of the worst rust I have ever seen on a hinge, flaking away like a perfectly cooked piece of cod !
Luckily I have a spare hinge from the recent Goliath panel groups buy , so Will reduce the width slightly (from both sides ) and even the drilled holes line up with the midi !
Attachments
Flyback2021
Active member
It will certainly take a while (at least a year with everything else to complete ) but have the panel now so can start to look at recreating this beauty with one of the midis.
Flyback2021
Active member
What a treasure trove you have my friend !
I still can’t believe you had the continental midi manual 😂 love telling anyone (mainly EC fans on here !!)who will listen about that.
Well it's yours if you want it along with the Side Sticker, to be honest they are courtesy of Julian really as I let me have loads of marquees cheap
It's not a game I have so don't need it but I used to play it on the C64, badly most likely
Will be one of these cut down to fit as you see from the photo of the cab the white instruction boxes are closer to the edge and I'd say the top/bottom was trimmed also
Be nice seeing it converted to left hand drive too
It's not a game I have so don't need it but I used to play it on the C64, badly most likely
Will be one of these cut down to fit as you see from the photo of the cab the white instruction boxes are closer to the edge and I'd say the top/bottom was trimmed also
Be nice seeing it converted to left hand drive too
Flyback2021
Active member
I will certainly sort out a generous trade and organize a vip hospitality package when you come over to visit.
Indeed ! This should be a win for the left hand drivers also ! Will do other as Konami GT but will wait to source a board.
Indeed ! This should be a win for the left hand drivers also ! Will do other as Konami GT but will wait to source a board.
Flyback2021
Active member
This peaked my interest , screamed Electrocoin build style (1994) the foot pedal area is similar to overdrive / chase hq with T moulding style used on Lethal enforcers 2 and later silver strike style cabinets .
Not much info out there about it
Not much info out there about it
Flyback2021
Active member
Came across this on the Arcade Museum site . Would love a hard copy if there is one out there .
