Problem MS9 wei ya chassis

[FinalFight]

I have 2 wei ya chassis I think they are the Wei-ya M3192D just look like a rodotron.
previous owner sent me the 2 one of them had lost one of the frequencys (they were fitted to an astro)
I'm wanting to use one on a ms9 in a sega rally but feels like I'm missing something :/ they have a vga cable that runs from the neck board actually I remember on the atomiswave cabs they had some sort of an adapter the vga cable plugs into.
Any links on how to install these ?
Thank you

 

[FinalFight]

On the sega cabs you normally plug into this connector that comes from the nanao chassis but the weiya doesn't have it

 

[gunblade]

why do you want to replace a ms9 with a weiya?

its cga to vga adapter you will require plus the ms9 yoke has a different pitch connector for the vertical

 

[FinalFight]

hi grant the machine didn't come with a nanao chassis and they was the only ones I could get hold of
I know some used to use them on the astros I didn't know you had to use a cga to vga adapter 😔
I just wanted the tube to be setup as it was 24khz

 

[gunblade]

amazon have the cga adapter

 

[FinalFight]

I'm still trying to get my head around how it attaches to the cab wiring has the connector got to be removed

 

[gunblade]

ideally the old chassis loom would be there and it would be easy but you will need to make a new loom

 

[FinalFight]

Feel like just looking for a ms9 chassis 😫
Thanks grant

 

[gunblade]

ms9 chassis complete with fitting plate, wiring loom and remote board

 

[FinalFight]

Thanks grant and if I decided to just basically use it by vga into a pc setup it's the pitch connector that needs sorting?

 

[Retroman839]

atomiswave like egret 3
Are 31khz vga standard

Just saying as which of the resolutions blew ?

I think wei ya yoke connector is diffrent too
All in one with narrow pin pitch

 

[gunblade]

Thanks grant and if I decided to just basically use it by vga into a pc setup it's the pitch connector that needs sorting

good idea

 

[Retroman839]

Samsung with a wei-ya 29" CHASSIS MODEL : M3129D01-7

 

[FinalFight]

atomiswave like egret 3
Are 31khz vga standard

Just saying as which of the resolutions blew ?

I think wei ya yoke connector is diffrent too
All in one with narrow pin pitch

one chassis is fully working one has lost one of them either the 15 24 or 31 I don't know yet.
I originally wanted to just fit the chassis and have it working like sega rally standard.. sounds like an effort though 🤣 I'm going to be using the tibal board so 31khz isn't a big problem .. maybe better?

 

[FinalFight]

I will upload some pictures tomorrow I don't want to mess anything up

 

[Retroman839]

As Gunblade says

Find the correct pitch connector for yoke vert. Thats your mission.

I know it’s smaller.
I have it.
Can take a pic tomo for you

 

[FinalFight]

There's a few cables and stuff with both of them.. it was removed from an ms9 thats why I'm confused

 

[Retroman839]

There's a few cables and stuff with both of them.. it was removed from an ms9 thats why I'm confused

Maybe had a yoke swap?

 

[FinalFight]

Haven't a clue alls I have done upto this point is plugged it all upto the tube but then was lost at the connection to the cab

 

[Retroman839]

Haven't a clue alls I have done upto this point is plugged it all upto the tube but then was lost at the connection to the cab

You need a male 15 pin amp up,,,