1983 Atari Star Wars Restoration 2012

acidburn

Active member
Feedback
2 (100%)
Credits
131CR
The story so far...


Welcome to your new home

IMG_0934.jpg


SwEEEeeet.

IMG_0959.jpg


My next tattoo?

IMG_0954.jpg


Deflection Board

IMG_0966.jpg


High Voltage Board

IMG_0967.jpg


ARII

IMG_0974.jpg


Amplifone
smiley4.gif


IMG_0975.jpg


Not from Ireland then

IMG_0987.jpg
 

acidburn

Active member
Feedback
2 (100%)
Credits
131CR


Things to do list


1) Kindly ask andyman to let me test game boards / other boards in his cockpit.


2) Deflection Board Rebuild


3) Power Brick Rebuild



4) Rebuild ARII



5) Rebuild HV Board? (maybe)





Other things

Flight controller "clicks" sometimes when turning left (Rebuild?)

Replace CPO and maybe the Marquee

Get Marquee Light Working

 

acidburn

Active member
Feedback
2 (100%)
Credits
131CR

acidburn

Active member
Feedback
2 (100%)
Credits
131CR
Forgot to mention it takes well over a minute for an image to be displayed on the monitor which doesn't seem right to me.

Can't seem to make the vector lines crisp either they seem dull and blurry.

The red LED on the deflection board goes out sometimes too.
 

Level42

Active member
Feedback
1 (100%)
Credits
212CR
Get rid of that filter board to start with.

Only introduces extra resistance.

Looks like burn marks on the top right side of the AR2 but also on the PCB set ??
 

acidburn

Active member
Feedback
2 (100%)
Credits
131CR
Level42 said:
Get rid of that filter board to start with.

Only introduces extra resistance.

Looks like burn marks on the top right side of the AR2 but also on the PCB set ??

I thought it was burn marks but its actually dust/dirt I think that part of the game pcb sits near the fan.
 
Top