Coin Door for Salamander Machine

[Grahamken]

Hi Folks,

First time poster. Have just rendered up a 3D model of a build I'm about to start building. I've redesigned all the original graphics from scratch and am currently in the middle of collecting the parts I need to build. Forgive me if this has been asked already, but does anyone sell coin Mechanisms like the one on this machine? Secondhand preferebly and doesnt need to be in working order as mainly for visuals.

Thanks in advance!!

 

[Ronnie Dent]

I think they will be the S10 type I will have some of the bits

 

[Grahamken]

Thanks very much. That would be amazing if you have any parts. I'll gladly sort you for anything that you can spare.

 

[Ronnie Dent]

I will have a look but if it helps the cab is an Electrocoin Goliath

 

[Grahamken]

Thanks, that really helps. I knew they were a fairly standard Konami arcade machine, but didn't know that model had a name. Now I know it's a Goliath I've found far more reference photos online which fortunately confirms I've gotten quite close with my measurements to the real thing and saves me having to rework my model.

 

[Bods]

Have you got a cabinet yet?

I have those complete coin doors, should have them on Electrocoin Goliaths anyway if your buying the cab to start off project but quite a few get converted to later electronic type doors

 

[Grahamken]

Have you got a cabinet yet?

I have those complete coin doors, should have them on Electrocoin Goliaths anyway if your buying the cab to start off project but quite a few get converted to later electronic type doors

Hi. Only getting back to making the Cabinet now after all these months and while referencing some stuff, I only came across your comment now as never received a notification. Nope, still not got a coin door and still very interested if youre still selling.

 

[johnparker007]

If it's any help, here are the dimensions for the Goliath from a flyer, so you can get it precise

johnparker0072021-11-18 19:53:15

 

[strykr]

Pop up to arcade club with a tape measure there are hundreds there. Im sure if you asked andy nicely he'd let you measure one properly.

 

[forcefulfil]

Don't look like he's logged in 4 a bit......

 

[yapstick]

Hi folks, anyone know the dimensions of the coindoor? (outer bezel - width and height)?
ta

 

[qjuk]

Hi folks, anyone know the dimensions of the coindoor? (outer bezel - width and height)?
ta

Is this information below of any use?…





Inner dimensions: 320mm wide and 250mm height. This is a double Coin Controls door with S10 mechs. If you are cutting a hole for the coin door, perhaps add 2mm allowance to the above measurements to allow it to clear the aperture.

Outer rim to outer rim measurements: 343mm wide, 278mm high.

 

[yapstick]

That's fantastic - exactly what I was after. Very much appreciated.
Thank you very much, sir.