Kick Harness Connector Help Needed

[John Bennett]

[ukvac] Kick Harness Connector Help Needed
Hi Guys,

Okay, with my POW board now up and running, the next thing on my "to do"
list is a Kick Harness or Loom for my Streetfighter II board.

There is a 10 pin connector on the board, which I believe is termed a CNI02
but I can't find any reference to that type anywhere. I have checked the
maplin catalogue and there is a page full of connectors which look very
similar but I don't know if they are the right ones.

Can anyone tell me the correct name or part number for the connector I need?

Cheers

John



DATA Imported from archives: originally posted by John Lewis (John.F.Lewis@btinternet.com)

 

[Swallow]

Re: [ukvac] Kick Harness Connector Help Needed
In message <007801c15a33$fe769220$585d7ad5@pentiumii>, John Lewis
<John.F.Lewis@btinternet.com> writes

Hi John,

These are 0.1 inch connectors and they are available from a variety of
sources. In the Maplin catalogue they are - FY94C @ 25p each on page 113
or we can also supply these - 10 way £0.18 (CON0237) plus postage.
Hope this helps.

Steve.

>Hi Guys,
>
>Okay, with my POW board now up and running, the next thing on my "to do"
>list is a Kick Harness or Loom for my Streetfighter II board.
>
>There is a 10 pin connector on the board, which I believe is termed a CNI02
>but I can't find any reference to that type anywhere. I have checked the
>maplin catalogue and there is a page full of connectors which look very
>similar but I don't know if they are the right ones.
>
>Can anyone tell me the correct name or part number for the connector I need?
>
>Cheers
>
>John
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

--

Steve Huntley.
Swallow Amusement Machines.
*** Pinball and Videos ***

http://www.coin.demon.co.uk