Problem MS9 wei ya chassis
- Thread starter FinalFight
- Start date
Retroman839
Senior Member
That’s a waste of money
But you need half of that the male half.
Ask in wanted ,
I might have a spare one you
Can have if I have 👍
But you need half of that the male half.
Ask in wanted ,
I might have a spare one you
Can have if I have 👍
FinalFight
Active member
Yeah that's what I mean normally you plug into that but wei ya doesn't have that socket
Retroman839
Senior Member
Yep you need to extract the rgb sync & ground from the vga db15
Retroman839
Senior Member
FinalFight
Active member
So for example if the vga connector was removed and linked directly to the cab wires it would work?
Obviously be better to make the connector to link them
Obviously be better to make the connector to link them
Retroman839
Senior Member
FinalFight
Active member
Few options then really.. tomorrow I'll take pics but will try the vga connector first if it gets working on that I'll be sorted
Retroman839
Senior Member
I’m sure This guy would
Make you half of you asked him.
It also has the demag on it which needs a momentary switch
Retroman839
Senior Member
Retroman839
Senior Member
I have no idea if weiya is compatible with ms9 I should add!
Retroman839
Senior Member
Out of stock !
Last edited:
Retroman839
Senior Member
Mine looks like this
Retroman839
Senior Member
Helpfull info hear
www.arcade-projects.com
AWSD / Egret 3 Wei-Ya 3129D problem
I turned off my AWSD (with a wei-ya 3129D, Samsung Tube) the other night after playing for about an hour, went to turn it on the next morning and had HV shutdown with the relays clicking on and off every second or so, and the flyback trying to start up. I pulled the chassis and looked it over...
www.arcade-projects.com
Retroman839
Senior Member
Last edited:
FinalFight
Active member
Didn't get a chance to look today I'm sure I've actually got that connector
If I remember rightly, it's double-quarter-circle plus punch ...
Retroman839
Senior Member
Crazy_1201
User
Crazy_1201
User
Also different c3129 chassis are for different monitors- yoke specs should be written on the side.