Super Monoco GP - sega upright

Flyback2021

Active member
vacBacker
Feedback
36 (100%)
Credits
1,955CR
Hi All,
I have a Super Monoco GP upright which I am looking to finish later in the year.
I wondered if there are any members who have restored one previously ?
I had the boards fixed last year so really a case of replacing the damaged artwork on sides and the damaged accelerator pedal.
There doesn’t seem to be any repro art available for this cabinet Is that the case @muddymusic ?
Picture of my cab and what the sideart
Should look like .
Appreciate any help



45468F97-44ED-4D52-AC79-11700E35E678.jpegD24BB1F3-C5F2-45F3-AA9B-394F70461C94.jpeg
 

Mikonos11

Active member
Credits
92CR
I think I've had these scanned artworks for 18 years, which is way before I started posting here.

If you're sure you want them, I'll add them to my list of artworks waiting to be restored, and I'll be able to restore them in about 7 or 8 months, once I'm free from most of my projects with other fans.
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,228CR
I saw some NOS side art pieces up on eBay last year, all one side though! It's a neon-type colour ink I think from memory so a little harder to reproduce, but might be within my expanded red CMYK range, I'd need to see an original piece to be sure.
Last cab I saw (a good decade ago probably) was actually dumped outside a building near my Dad's house, I took what I could from it but didn't have enough space for the main cabinet.
 

Flyback2021

Active member
vacBacker
Feedback
36 (100%)
Credits
1,955CR
I saw some NOS side art pieces up on eBay last year, all one side though! It's a neon-type colour ink I think from memory so a little harder to reproduce, but might be within my expanded red CMYK range, I'd need to see an original piece to be sure.
Last cab I saw (a good decade ago probably) was actually dumped outside a building near my Dad's house, I took what I could from it but didn't have enough space for the main cabinet.
Thanks for the info mate much appreciated. I have a side which is pretty decent will add some photos here later today .
I wasn’t aware of the nos listing on eBay last year 🤦‍♂️
I picked up a nos wheel badge from Rob at UDC recently.
 

Flyback2021

Active member
vacBacker
Feedback
36 (100%)
Credits
1,955CR
On the plus side the side art is mostly complete.
Broken ash tray through the drivers helmet, general scratches and some loss but not too bad.. The original red colour has faded throughout the cabinet to almost Fluoro orange now.

B626C0BA-C040-461B-8629-86A1BF04E514.jpeg
 

Attachments

  • 1B5DBE37-20CD-4002-AACA-8D796969307C.jpeg
    1B5DBE37-20CD-4002-AACA-8D796969307C.jpeg
    83.4 KB · Views: 6
  • A1D7E5F1-F02E-4074-8853-79FFAA64D1FD.jpeg
    A1D7E5F1-F02E-4074-8853-79FFAA64D1FD.jpeg
    72 KB · Views: 6
Last edited:
Top